Hate the #Samsung #S26 Ultra wobble when placed flat on its back? I made a thing to fix that.

https://makerworld.com/models/2521070

#3dprinting #BambuLab

I'd like to think this Voxel Vento filter I added is doing some additional good over what is in the printer already (I say, looking at the unfiltered top vent that flips open during most printing to shed excess heat). It does increase the noise levels a bit with the fans ramping up harder to maintain the target internal cooling (and messages from the system to system saying as much). We'll see if the white filter discolors over time.

https://voxelpla.com/products/vento-h2series-filter

#3dprinting #BambuLab

458 hours on the #BambuLab H2S so far and the second time I've been prompted to conduct lubrication and cleaning from its in-built schedule. Definitely needed it.

Been printing kilos of Sunlu matte black PLA on my #gridfinity project and either that or typical abrasion dust off the belts in the machine make quite the mess. Between the dust and the haze I've cleaned off the inside glass more than once, I'm glad I added extra filtration on my system's rear vent.

#3dprinting #BambuLab

What's going wrong today with my #3DPrinting ?
I've printed this model before, on the same printer (a #BambuLab P1S), and I'm not aware that I changed any settings in #OrcaSlicer

The wall loops are messy, the rest of the infill doesn't seem to even reach the walls...

Any suggestions?

I had the opportunity to try a #BambuLab printer at the #FabLabHH today and damn… it sucks!

Refused to accept my filament for solid 10 minutes (hotend sensor malfunction?), print failed (Spaghetti Detection didn't recognise anything) and upon the next attempt the printer crashed (software).

They seem to have problems with it all the time (it crashed the nozzle into the bed at least once, looked awful). Not even remotely as "easy" as the aggressive influencer campaigning suggests.
#3DPrinting

Make it make sense, #BambuLab ... part deux. #3dprinting

Make it make sense, #BambuLab... #3dprinting

Pop Mart sues Bambu Lab over copyright infringement. The Chinese toymaker filed a lawsuit at Shanghai's People's Court concerning knockoff Labubu character files uploaded to Bambu Lab's MakerWorld platform. https://3dprintingindustry.com/news/new-ip-case-against-bambu-lab-heads-to-shanghai-court-249801/ #3Dprint #3Dprinting #Consumer #BambuLab

Komplette Webseite mit KI übersetzen lassen, was kann schon schiefgehen.
#BambuLab #Makerworld #AI

Bambu Lab Cyber Brick – vytiskli jsme spoustu kitů a všechno vyzkoušeli

https://vhsky.cz/w/sRsnrwAL8wrP8cXfQ7nuNd

📰 Noticias 3D en 3 minutos: novedades de la semana en impresión 3D

Esta semana hablamos de nuevas tecnologías que siguen empujando la impresión 3D hacia adelante: materiales, avances técnicos y alguna sorpresa interesante para makers.

Y además 🎁
regalo para nuevos suscriptores del blog este mes.

Si te gusta el mundo maker… pásate a verlo 👇
https://substack.com/home/post/p-190133788

#3Dprinting #Impresion3D #Maker #BambuLab #Filamento3D #Tecnologia

My P1S 3D printer is running in LAN-only, developer mode in order to bypass Bambulab's cloud.

I use Home Assistant to control/monitor prints, with spaghetti detection module:

• Bambulab Home Assistant integration: https://github.com/greghesp/ha-bambulab
• Spaghetti detection HA module for P1 printers: https://github.com/nberktumer/ha-bambu-lab-p1-spaghetti-detection

Good to see that for people who don't run Home Assistant, there are alternatives:

https://www.xda-developers.com/finally-have-full-control-bambu-lab-printer-ditched-bambu-cloud

• Bambuddy: https://bambuddy.cool
• Spoolman: https://github.com/Donkie/Spoolman

#BambuLab #3DPrinter #HomeAssistant #Bambuddy #Spoolman

@octoprint @minkorrekt @josefprusa

War mir gar nicht so bewusst, dass im 3d Druckermarkt, der nächste Level der Enshitifikation im anrollen ist... 💩

https://minkorrekt.podigee.io/390-mi383-pi-festwochen#t=6818

#minkorrekt #octoprint #opensource #BambuLab #prusa #3dprining #enshitification

#fidgettoys #bambulab #Austria

Researchers at Polytechnic University of Bari have developed a method to directly electroplate copper onto 3D printed parts using an inexpensive Bambu Lab A1 printer. The technique uses a custom electroplating head with G-code automation to create hybrid polymer-copper structures for electronics. The BOM cost is under €95, potentially enabling home circuit printing for around US$ 700. https://3dprint.com/324156/bambu-lab-a1-used-to-directly-3d-print-copper-electroplated-parts/ #3Dprint #3Dprinting #3Dprinter #Materials #BambuLab

Bambu Lab reports 2025 was a breakout year with 10 million monthly active users on its MakerWorld platform: The platform saw 2.6 million original models uploaded and more than 290 million print hours logged, showing consumer 3D printing has become a mainstream creative tool for millions of users. https://3dprint.com/324181/bambu-lab-says-2025-was-a-breakout-year-10-million-monthly-users-and-real-business-growth/ #3Dprint #3Dprinting #3Dprinter #Consumer #BambuLab

Laser Modul getestet, gravieren und schneiden von Leder und Foam. Hat sehr gut geklappt und ich freu mich drauf da hoffentlich noch coole Sachen mit zu machen

#bambulab

finaly got around finishing this. very helpful and works flawless :) #3ddruck #3dprinting #bambuLab

aaaaaaah warum sind die filament presets in #bambulab nicht einfach alphabetisch sortiert

#3ddruck