#LoRaAPRS

Kevin Titmarshkevintitmarsh
2024-08-19


First real test of new coverage since the increased antenna height for RX on my LoRa APRS from the car back to the gateway, it’s massively improved the LoRa footprint.. it almost gets me all the way to work!

Further coverage testing to be carried out but initially it looks like a big win for coverage ad previously it would only get about half way before dropping off and the other one just about covering (limited cover on the second)

LoRa APRS path from MB7UKT gateway
Kevin Titmarshkevintitmarsh
2024-08-17

Finally gotten round to moving the x30 dual band (144/430mhz) and the adsb (1090mhz) antennas from inside the loft to outside
Been saying I’ll take down the pair of MikroTik SXT LTE units for ages as their no longer in use for a while

Should now have better coverage for my LoRa APRS igate (MB7UKT) and great coverage for my packet BBS 2m node (GB7PKT)

Pole with pair of MikroTik sxt lte unitsNew pole with dual band antenna and adsbNew pole with adsb and dual band vertical
2024-05-28

It'd be great if the #LoRaAPRS would not modify packets to add an RSSI field in the comment text.

APRS packet data must be retransmitted unmodified, because modified packets will be duplicates. github.com/hessu/aprsc/blob/ma

2024-05-04

#LoRaAPRS #LoRa #ESP32 #TTGO
Setup in the front window with a battery pack, and the T-Beam displaying that I have a message. (That I sent myself)

LoRa APRS TTGO T-Beam screening showing call sign, date, time GPS location, and that a message has been received As well as other information.TTGO LoRa board for the LoRa APRS project, sitting in the front window with a battery pack. You can see my Crown Vic CVPI in the background.
2024-05-04

New #antenna arrived for the #LoRaAPRS setup. While better then the results before, This still doesn't work well.
I placed the receiver in the front window, but still had the transmit side in side the car - this is probably the problem. #LoRa is very low powered after all.
My car may also be noisy in the 433mhz band.
But I made some progress with the setup, now just to make better progress LOL.
On a plus note, the device displays messages nicely, so once working better - that will be nice

LoRa APRS device with bigger 433 Mhz antenna TTGO ESP32 LoRa board inside a 3D printed red case.TTGO T LoRA APRS device with new 433 mhz antenna, in 3d printed black caseAPRS.FI website showing the location of KD8BXP-10 and KD8BXP-20 APRS LoRa devices and the track of KD8BXP-20 which admittedly isn't a great track - but it's a start and it's better then it has been.
This is driving around the circle in my apartment complex, and about 3 blocks out on the main road in front of the complex.  I also switched to "walking" mode and it did good showing the path to my apartment.
2024-04-19

Going to have to do a lot more testing, so this seems to work sitting on the desk, but doesn't work when I'm out.
But I had problems with LoRa 433 around here before. So today I tried a couple of different antenna, still not working.
SO I think all I can do is get an external antenna for both of these devices and see what happens.

Maybe I need an amplifier?

#LoRa #TTGO #LoRaAPRS #APRS #HamRadio

TTGO LoRa board with oled screen, setup as an digipeater for LoRa APRS, on the screen shows KD8BXP-10 and listening as well as some other information.TTGO T-Beam, showing KD8BXP-7, grid square, a person icon, and some other information. Setup for LoRa APRS
Olivier - F4IHAf4iha@mastodon.radio
2024-04-07

Très bonne couverture #LoRa sur la région de Lyon. Avec une trame reçu à près de 110km
#aprs #LoRaAPRS

2024-03-25

#LoRaAPRS first weatherproof enclosure completed!! Very little modification required. Those M2 nylon standoffs work great.

Kevin Titmarshkevintitmarsh
2024-03-17

Following on from the previous post, I’ve put together a how-to get started with guide

sidx.org.uk/projects/lora-aprs

Basic setup to get started and programming the boards

Thanks to Ricardo for ongoing code dev on tracker & igate and team on web dev

2024-03-07

On this note, I've set up one of my #Meshtastic nodes again to mess with. I forgot that if you hook it to the network, you can access it via IP.

If I hadn't toasted the charging circuit on the other T-Beam, I could use that one, too.

I have some notes around on #LoraAPRS using these boards. I was trying to work out comms for an event without needing to use #hamRadio directly.

2024-02-01

Anyone have any recommendations for what kind of antenna I should get with a T-Deck for #LoRa?
915, 868, or 433MHz?

#LoRaAPRS #ham #lilygo

A product page for a handheld computerA selection of frequencies on a handheld computer
2023-12-26

Jetzt bastle ich schon über 2 Jahre an dieser #LoRaAPRS-Firmware für die T-Echos von Lilygo. Heute hab ich mich dann doch mal entschieden, Version 1.0 zu taggen 😃 .

github.com/cfr34k/t-echo-lora-

#amateurfunk

2023-11-25

Samstags kurz vor dem Mittagessen: noch eben die Tracker und iGate Software von CA2RXU ausprobieren. Macht einen sehr guten Eindruck und bietet viele Einstellmöglichkeiten: github.com/richonguzman #loraaprs #igate #tracker #hamradio #lorawx

Fred F4EED/KI7QQPf4eed@mastodon.radio
2023-08-10

Bon flashage et tes de mon #tracker #loraaprs av c le dode de @richonguzman tous semble fonctionner... #radioamateur #hamradio #lora

2023-08-09

Is anyone else interested in #LoRaAPRS at the #cccamp23 and will bring a module?

2023-03-25

Anyone near Paris, France to make some tests with #LORAAPRS ?

2023-03-25

github.com/dl9sau/TTGO-T-Beam-
Un firmware pour les cartes TTGO Tbeam etc.. qui supporte le mode AX25/KISS avec un bon paquet de paramètres possibles #LORAAPRS

2022-11-21

@sm0onr on the same hardware, you can check out #LoRaAPRS and integrate into the rest of #APRS as long as you don't want encrypted messaging.

2022-11-18

@oe5bpa adding #LoRaAPRS tag we've been using.

2022-08-31

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst