#MECHANIC

Zendrian Tech EV Thailandzendrianth
2025-06-19

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

Alex@rtnVFRmedia Suffolk UKvfrmedia@social.tchncs.de
2025-06-13

Sketchiness on all sides - the #mechanic probably started off legit but ended up committing #fraud rather than admit he'd taken on a job beyond his capabilities - but the #van owner also should have kept his registered keeper address updated - its a legal requirement to do this, and if he didn't do so when the van was working makes you wonder if this was deliberate to try and evade parking fines and/or being held to account of how he drove the vehicle?

archive.ph/jMy3X

Zendrian Tech EV Thailandzendrianth
2025-06-12

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

2025-06-09

When the taillight assembly is busted and you've got covid so you can't get to the junkyard but you're also originally from Outer Redneckistan so it's not a problem. #shadetree #mechanic

A taillight assembly removed from a car. One of the bulb holders has had two wires soldered to the terminals. The opposite ends of the wires are screwed down to metal parts of the taillight assembly.A taillight assembly removed from a car. Some psycho has wired in the brake light holder with a soldering gun and then used electrical tape to more or less hold it together.A taillight assembly attached to a car. The brake light is illuminated.
2025-06-09

There are few things in the world more satisfying than this, once you’ve experienced the alternative of a snapped off easy-out.

#mechanic #engineer #satisfying

2025-06-05

Pretty sure at least the passenger side has a blown head gasket at this point, basically that whole side of the motor is covered in oil and then some

almost all the plugs on that side are pretty gunked and seized in the head too :blobfoxdead:​

#automotive #repair #mechanic

Zendrian Tech EV Thailandzendrianth
2025-06-05

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

2025-06-04
June 8 2018
#dutchfood #broodjekroketmetmayo
In other words, bread with beef croquette and mayonaise (which is my favourite #Dutch #food)
Of course there's no other way to eat it than to mash it!
🔩🖤Mr & Mrs #Mechanic 🖤🔧 #bikelife #bikerchick #Netherlands #Holland 🌚 #goth #gothgirl #metalchick 🎸 #tattooedlady #citylife #passion
2025-06-04
June 16, 2018 Anniversary dinner with my love 💖
Thank you for a great evening honey! 💞👌🍸🍣🍨😘
🔩🖤Mr & Mrs #Mechanic 🖤🔧 #bikerlove #bikelife #bikerchick #bikercouple #food #sushi 🌚 #goth #metalchick 🎸 #tattooedlady #Love #passion #speedandstuff #couplegoals
2025-06-04

"I went to the mechanic."

"Car troubles?"

"No."

"Why did you go there?"

"Brain troubles."

"What type?"

"Can't you tell by the new fins? It was overheating."

"I thought it was a tinfoil hat. Wait.. it is a tinfoil hat! What kind of tinfoilhatttery are you trying to pull?"

#mechanic #brain #overheating #TinfoilHat

2025-06-03

This video showcase the animation of assembling Kenworth truck using Blender and eevee as a render engine,
The background or warehouse is also made in blender using pbr and blender shaders
#blender #blender3d #animation #truck #kenworth #technology #tech #solidworks #maya #cinema4d #houdini #nuke #3danimation #blenderanimation #b3d #assembly #designer #mechnicalengineering #mechanical #mechanic #engine #tyre

Hot Potato 🥔✓Gnagnao@gamerstavern.online
2025-05-30

How many times have you heard the phrase "Eh, old cars need too much maintenance..."?

Now, I'm no mechanic (or, atleast, all I know is self-taught) and still I find myself constantly leaving 1-star ratings to all the men that I mistakenly happen to leave my 18 years old car to.

Of the 5 times it happened in these 4 years, 3 out of 5 I found the car in the worst shape possible, volunteerily sabotaged to create new problems.

Now, we're talking about a very sturdy engine. A diesel, and on top of that a very sturdy diesel (1.6 HDI), so most of the things that happen to it are "easily" fixable.

However, if you have an old car, be sure to always have a general understanding of how things were in your car before going to the mechanic. Take pictures. Ask what they've touched and done.

It's not like all of the mechanics are scammers, but even if you find mechanic-dedicated web spaces, you'll notice there is a tendency to decide what's best for yourself and your car instead of doing their job 🙂

The pics are what I found in my engine 3 weeks after going to the mechanic. Everything was loosened and a whole exhaust tube wasn't even fitted at all.

And yes. The car kept going. And I just fixed most of the errors that came up.

Be your own angel.

#mechanic #cars #repairs #scam

Turbo flow gasket completely detached from the turboOil vapor tube completely detached and missingOil vapor tube disassembled
Zendrian Tech EV Thailandzendrianth
2025-05-29

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

may mayhem 17-20
17- isometric, a game featuring ZX9
18- daily routine ⏰
19- species swap, toni and tial made a mistake?!
20- wires, smart urodelian nathan at work
#marubahrt #furryart #scalieart #furry #scalie #digitalart #art #reptilian #bird #scifi #mechanic #iguana #snake

Zendrian Tech EV Thailandzendrianth
2025-05-22

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

Bun (he/they)bun@disabled.social
2025-05-22

#MutualAidRequest for Tiamat, who recently got a new (used) vehicle, and she is a mechanic, so she is doing the repairs herself. She needs $20 for a part that could save her engine AND transmission. Please boost this!

$20/20 funded

Cashapp: $neonxdaze

Any amount helps! Thank you.

#MutualAid #TransMutualAid #TransCrowdfund #BegPost #Urgent #CarRepair #Mechanic

Zendrian Tech EV Thailandzendrianth
2025-05-15

The first full service e-bike and e-scooter repair and maintenance shop in - we'll get you back on the road and keep you riding smoothly. Pickup & Delivery available! 🚴‍♂️✨ Whether you're in need of a quick fix or a complete tune-up, our expert team is here to help. Reach out today!

Claudio Piresclaudiocamposp
2025-05-13

Mechanic WordPress theme - Auto and Car Repair Services WordPress Theme
visualmodo.com/theme/mechanic- Auto mechanic car repair workshop theme is created as a wonderful solution for any cars and automobile websites, cars repair workshops, auto blogs, car services, garage and other industrial websites that require special cars niche functionality and auto service presentation 🚙🚘🚗🚐🚍🚛

ENG. Tretron 🐲tretron@bark.lgbt
2025-05-12

This weekend's fustration:

I placed my new milling machine on it's table. I can now it out and do a few test cuts. However I forgot that the first owner of the machine (the second owner never used it) was terrible in machine skills and maintance.

So que me wanting to do a test cut and discover that the clutch for the worm-gear lowering mechanism was slipping. Taking the clutch out I discovered someone coated it with way-oil that turned into a sticky but slippery mess. So before i could do a test cut; I had to take the whole stock lowering mechanism appart to clean it and re lube the parts that need oil.

Explanation of how this system works is in the alt text of the photos.

Also if someone knows better tags for this type of post let me know! I am struggling to find the right community for machine shop toots.

#engineering #hobby_machineshop #mechanic #DIY #HomeShop #HobbyMachineshop #machineshop #MechanicalEngineering use

Close up of the quill feed axle. This axle holds both the Fine quill feed (works via an worm gearing) and the large course guill feed that is mounted dirrectly on the axle.The quill feed mechanism disassembled for cleaning. Shown to the right is the course quill feed with the three handles and the first part of the conical clutch. This handle dirrectly drives quill axle dirrectly via an key drive. In the middle is the worm-gear sproket that is driven by the worm gear and moves freely over the quill axle. This sproket has the second part of the conical clutch. To the left is the fine quil feed housing with wormgearing. This drives the sproket and holds it in place.

The way the fine quill feed works: The course quill feed (on the right) drives the quill. With an hand screw you force the course quill feed handle into the sproket of the worm-gear. This enables to clutch with friction. Now you can drive the quill with the fine adjustment. To drive the quill with the course adjustment you need to unscrew the clutch. This way the sproket rotates freely over the quill axle/shaft and the course wheel is no longer linked to the fine feed mechanism.Photo of a table top mill standing on a woden table. The mill has an grey cast iron base where the X-Y table is placed up on. The top of the machine is resting on a bare metal cylinder that allows it to move up and down. The top of the machine is white and has an drill holder. The motor of the mill is behind the mill and the top of the mill is a plastic protection for the belt drive mechanism. The mill has both a drill press style quill feed handle (placed on the right side of the machine) and an fine adjustment quill handle that works via a worm-gear (placed on the normal quill feed and reachable via a wheel at the front of the machine, next to the depth gauge)

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst