Bùng nổ tốc độ: QNAP trình làng “siêu phẩm” card mạng 10GBE kép, chinh phục mọi giới hạn! #QNAP #10GBE #SRIOV #RDMA #MạngCaoTốc #CôngNghệMới
## Bùng nổ tốc độ: QNAP trình làng "siêu phẩm" card mạng 10GBE kép, chinh phục mọi giới hạn! #QNAP #10GBE #SRIOV #RDMA #MạngCaoTốc #CôngNghệMới QNAP vừa chính thức ra mắt card mạng QXG-10G2SF-NXE, một bước đột phá đáng kể trong lĩnh vực giải pháp mạng tốc độ cao. Sản phẩm này được trang bị hai cổng SFP+ 10GBE mạnh mẽ, hứa hẹn mang…
I have a ConnectX-4 LX card. Using openvswitch, switchdev mode, bunch of VF's passed through with VLAN tags etc. (Proxmox) all working just fine.
Except to BSD VM's. mlx5en fails to load; mlx5_cmd_check fails with a CREATE_TIR error: bad parameter (syndrome 0x201139) and mce0 isn't created.
201139 is 'stateless tunneled offload' not supported.
VF doesn't need it, is there a way to stop BSD from trying the offloads when loading the module??
Oof, that sounded much scarier than it turned out - could've been a 30 bucks brick!
It's fine, i've already rebooted the box. I'm not exactly sure about the improvements, though.
My MCX311A-XCAT always had all Fs in the GUIDs - shouldn't those be "Globally Uniquely IDentifying"?
While i'm figuring out how to utilise the #SRIOV capability, it'll be a member of br0.
…it couldn't be a simple "virtual-function-count" in my #Netplan yaml, could it? (anyone?)
This is the source for #intel #i915 #sriov support using #dkms . Just wish support was in the OOTB kernels - not yet.
Even though the host is seemingly working, it's a bit fragile as will need rebuilding for each kernel update (pinned for now)
Anyone gone through this with the #n100 ? Surely there must be others?
Prior to this I tried full GPU passthrough (ie full device passthrough, not virtual gpu) , but couldn't get it to work reliably.
Question regarding #SRIOV on an Intel I350: I'm seeing the egress traffic of the VFs as ingress traffic on the PF (destined for the non-local unicast MAC address of the external router).
Everything works, so the traffic *also* reaches the router, but it seems like the NIC is a hub instead of a switch.
Is this normal? Or am I holding it wrong?
Just worried that this additional load on the host system kind of negates the gains of using SRIOV…
The existence of SR-IOV implies the existence of JR-IOV.
#SRIOV #virtualization #LookingGlass #GPUPassthrough #VirtualMachine
