Lmst

Tested: Star Destroyer Cross-Section Model

#AdamSavage #StarDestroyer #StarWars #FanthaTracks #Tested #AdamSavage #hansjennsen #richardchasemore

Look inside this cross-section Star Destroyer.

Read the whole story at the below link:

#StarDestroyer: No, not from #Lego, but extremely large at 1.2 meters long and #10,000 #pieces. Crazy and damn cheap, available on #Amazon for €399. https://amzn.eu/d/dMmAKTw

Sorry there hasn’t been an update for a while. The weather has been really good here and the garden has had to take priority. I’ll be back to building as soon as I can. #StarTrek #StarWars #StarTrekModels #SciFiModels #Cerritos #Duderstadt #StarDestroyer #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx

The Cerritos model in the foreground with the superstars class at the back facing away from the camera

The venator class republic star destroyer model has been painted black and sitting on a white shelf.

The blue LEDs finally arrived, so I got them wired up and glued into place. I then glued both halves of the main body together. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Inside of the model showing all the engine LEDs glued into place.

The model is being held together with yellow masking tape while the glue does its thing.

Got most of the LEDs wired up in the main body of the #Venator, I didn’t have enough blue LEDs to do the engines (I ordered more a few days ago, hopefully they will arrive tomorrow). #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Inside of the model showing all the lights in place. Lights are off

Same as previous picture, except the lights are on.

I put the top half of the model in place to show the lights coming through the windows that were drilled.

Back of the model showing the two of the blue engine LEDs lit up. Another 8 need wired up once they arrive.

Control tower LEDs have been wired up. Quick light test before I glue the tower to the main body. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Tower assembly sitting on the main body of the model

Same as before but with the lights switched on.

Control tower assembly complete. Next I need to wire up the LED strips inside it and on the area where it will be glued to then I can wire up the main body. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Last night I applied milliput around the gaps/seams of the two control towers. Time to get them sanded. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Control tower parts with white milliput applied the gaps.

Glued an SMD into the front of each control tower, then glued the parts together. Gap/seam filling with milliput next. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

The two control tower parts glued together with wires sticking out of them.

Engine parts have now been glued together. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

This kit doesn’t need a lot of internal light blocking, so I hand painted a layer of black followed by a layer of silver on the largest parts and gunmetal on the engine parts. #StarWars #StarWarsModels SciFiModels #Venator #Republic #StarDestroyer #2700Scale #ScaleModels #ModelBuilder #MKMModelwerx

The inside of the largest model parts painted silver

The inside of the engine parts painted gunmetal

Can’t do any paint work right now (my modelling room is being used as storage), so I’ve started work on the 1/2700 #Venator. Windows have been drilled, sides have been glued into place, stand rod and power connector in place, some engine modifications and milliput applied to some gaps/seams. #StarWars #StarWarsModels #SciFiModels #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx

Closeup of the stand hole and power connector

Lower model half held up against the light to show it coming through the window holes

Lower half held up against the light to show it coming through the hangar bay

New arrival. The Revell 1/2700 #Venator class Republic #StarDestroyer model kit. Fun fact: Of all the ships in the #StarWars universe, this is the only one I actually like 😱. #StarWarsModels #SciFiModels #ScaleModels #ModelBuilder #MKMModelwerx

Box of the 1/2700 scale Republic Star Destroyer model kit with a picture of the model on the front.

Open model box showing the grey model parts inside.

May The Fourth Be With You! Some Star Wars arts I’ve done fairly recently. These were all commissions. 😊 #maythe4thbewithyou #StarWars #spaceship #starship #painting #fanart #millenniumfalcon #stardestroyer

Mixed media drawing/painting of Super Star Destroyer Executor and Imperial fleet arriving at Hoth

Gouache painting of the Millennium Falcon blasting vertically into space from planet Duroon

Acrylic painting showing the Holdo Maneuver from Star Wars with blast-damaged Snoke ship and star Destroyers viewed from above

I asked Google Bard to generate some photos. Bard declined my first prompt due to copyright issues but it had no problem making them after I tweaked my request.

The link goes to the chat.

#StarTrek #StarWars #USSEnterprise #StarDestroyer #LLM ##ArtificialIntelligence #GPT #GoogleBard

https://g.co/bard/share/e79a4303ae98

Prompt: Make it a photo of a starship similar to the Enterprise firing phasers at a destroyer similar to spaceships in the Star Wars universe.

Forgot to post the final result of my Star Destroyer Lego set I did yesterday. It turned out freaking amazing!

#StarWars #StarDestroyer #Lego

LEGO model of the Executor Super Star Destroyer from Star Wars on a black stand, with the box in the background on a table.

My next Lego project. My oldest got it for me. The Star Destroyer from Star Wars.

#Lego #StarWars #StarDestroyer

A LEGO Star Wars Executor Super Star Destroyer set box.

I feel like we've gotten a lot of very tiny versions of fairly large artillery this year. And Imperial stuff is all light gray and dark gray. Very monochrome. Sabine really needs to get in there and add some much-needed splashes of color.

Two more windows. They're saving it for the last day, aren't they? #LegoStarWarsAdventCalendar #StarDestroyer #Endor #ReturnOfTheJedi #StarWars #MayTheForceBeWithYou #legos #lego #AdventCalendar 3/3

How nice that they gave us a cute little baby #StarDestroyer . It'll be so much fun to watch it grow up. Now I just need to figure out what to feed it. #LegoStarWarsAdventCalendar #Endor #ReturnOfTheJedi #StarWars #MayTheForceBeWithYou #legos #lego #AdventCalendar 2/3

Day 22 of the 2023 #LegoStarWarsAdventCalendar , and I recognized the shape immediately. And it actually wasn't a difficult build like I thought it would be. #StarDestroyer #Endor #ReturnOfTheJedi #StarWars #MayTheForceBeWithYou #legos #lego #AdventCalendar 1/3

#StarDestroyer

Client Info