#VanBuild

Custom fuse & relay box installed. ⚡

Printed the outer frame in PETG and used PC for the relay holders for better heat resistance.

Fits in the original location and holds:
• Eaton fusebox for 20 blade fuses
• 5 relays (standard 4 or 5 pin)
• headlight dimmer
• turn signal flasher

#Ceravanlife #Vanbuild #DIYEV #EVconversion #VWcamper #VanlifeDreams #Voltswagen #BayWindow #OnlyVans #HacklabFI #TampereHacklab #Makerspace
2025-07-21

Today I completed the six wood panels that cover the insulated walls of my camper van. ✅
They will eventually need filler, primer, paint, and in some sections wallpaper. Maybe. I haven't decided. 🎨
The doors and ceiling also deserve wood panels but next on The Big List are a couple of 250W roof-mounted solar panels. ☀️🔋
Gotta have juice to 💻 and 🧑‍🍳!
#vanBuild

2025-07-20

I should stop predicting van project durations. I'm always wrong, they don't matter, and I have unnecessary feels when I go into overtime.
That said, I'm looking forward to reassembling the living area in the next week or so.
#vanBuild

2025-07-20

Groggy morning thought: Should I wallpaper my camper van interior with kapton tape?
#vanBuild

2025-07-16

Note to self: Don't use thin cheap plywood and a dull jig blade unless torn out nasty edges are the goal.
🤦
#vanBuild

⚡ in finnish we'd say "johtohommissa" 😅

Wiring the main 12V harness.

Of course there's a way of making everything complicated, so in my obsession of avoiding unnecessary splices and connectors I went and bought 90deg "flag" spade connectors for H4 sockets only to find those can't be crimped with normal pliers.

Luckily pliers are cheap and nowadays I know how to use an angle grinder.

#Ceravanlife #Vanbuild #DIYEV #EVconversion #VWcamper #VanlifeDreams #Voltswagen #BayWindow #OnlyVans #HacklabFI #TampereHacklab #Makerspace
2025-07-01

If anyone has a recommendation for a well built USB-C power hub that accepts 12V DC input at around 20A, I would love to know.
This is to power the IT cabinet in my camper van. It won't be anywhere near 20A but I like to leave a lot of room for growth.
#vanLife #vanBuild

Minor progress update again. :)

Got the leaking steering box finally sealed and reinstalled. Steering is working again! Then went on to powder coat and bolt down the gas pedal mount, brake fluid reservoir and finally installed bunch of plugs and made some lasercut cover plates to cover all the (now) unnecessary holes in the floor.

Meanwhile been planning the motor phase connectors and inverter placement. I don't have enough room to comfortably pull the phases out from the top as they normally do, but I *think* I can connect to them from the side via a small maintenance hatch instead. 😏

#Ceravanlife #Vanbuild #DIYEV #EVconversion #VWcamper #VanlifeDreams #Voltswagen #BayWindow #OnlyVans #HacklabFI #TampereHacklab #Makerspace
2025-06-28

TIL about ATGANI from the offroading community: All The Gear And No Idea. 😺
For camper vans there are a seemingly infinite number of gear options. It has been frustrating to build as needs arise because by definition I'm always bumping into unmet needs. However, my ideas for what I need have drastically changed after living with the van for just a few months. It's a big win, I think.
#vanLife #vanBuild

2025-06-19

Van LAN parts:
- Nighthawk M6 Pro 5G modem
- OpenWRT One router
- Sodola 8x2.5GbE 1x10GbE switch
- RPi 5 w/SSD
- Home Assistant Connect ZBT-1
- Home Assistant Voice
- SwitchBot C02 & temp sensor
- Tangera music player
- BT ear buds
- BT ear cans
- Phone
- Tablet
- Lappie

I've been using the modem, air sensor, ear buds, phone, and tablet but the rest is in a box waiting until the camper conversion is closer to V1.

#vanBuild #vanLAN

Sneak peak. Waiting for some parts to arrive, so woodworking for a change meanwhile.

I want a warm wood finish for the interior instead of the original vinyl leather look. Took measurements, lasercut out of baltic birch plywood. Might still add one or two more coats of oil, but already looking a lot like what I planned! 😊 You really learn a lot when doing all on your own! ...but it's a very slow progress. 😂

#Ceravanlife #Vanbuild #DIYEV #EVconversion #VWcamper #VanlifeDreams #Voltswagen #BayWindow #OnlyVans #HacklabFI #TampereHacklab #Makerspace
2025-06-11

Whew! 😌
My goofy idea to run air vents through the rear (D) columns of my van has worked out well and ticking it off my my to-do list feels great 💪🎉.
From outside of the van the portable AC is a barely noticable white noise. Fingers crossed the AC and insulation performs well enough in hot weather to keep the more fluffy of the smols from melting. 🫠
#vanBuild

A photo of the rear column of a cargo van with an air outlet mounted on it and a 5" tube connected to that.A photo of the rear column of a cargo van with an air outlet mounted to it.A photo of the rear column of a cargo van with an air outlet mounted to it.
2025-06-11

I threw my Ford Transit column ventilation parts up on Printables in the off chance that someone else will want to avoid cutting holes in their roof for MaxAir fans or AC units. It's a reasonably stealthy way to move air in and out of a camper van, though of course if there is steam coming from under your van then you're so busted. 😺
I suppose if you really want to go stealth then you'll need heat transfer and a condensation catcher.
printables.com/model/1325074-f
#vanBuild #vanLife #3DPrinting

2025-06-10

I'm taking advantage of proximity to my 3D printers to make a few parts for the ventilation system in my camper van.
#vanBuild #3Dprinting #FreeCAD

A screenshot of a 3D printer application showing several plates of parts for a ventilation system.
2025-06-09

Dog bless car nerds who share their process like this person who made a step by step video for sniffing car data, figuring out what it means, and then making a custom display with live info.
Video: youtu.be/ktPXFoGxFKM
Sniffer shield for ESP32: store.mrdiy.ca/p/esp32-can-bus (with read-only mode!)
Sniff analysis software: savvycan.com/
#vanBuild #vanLAN

2025-06-08

Will camper van parts* made wih Bambu's PETG HF survive this Summer? Let's find out!
🤞
* interior, non-structural, nowhere near the drive train, closed course, professional driver, DNTTAH, etc.
#vanBuild

Back from holiday, finished the final motor mount and there it finally is! 😊

#Ceravanlife #Vanbuild #DIYEV #EVconversion #VWcamper #VanlifeDreams #Voltswagen #BayWindow #OnlyVans #HacklabFI #TampereHacklab #Makerspace
2025-06-07

It's forecast to break 90f in a few days so I better complete the van's cabin AC installation, huh?
You know, for the smols. Not me. I'm sooooo tough. 🫠
#vanBuild

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst