Double Beam UV-Visible Spectrophotometer LB-20DBS
Labotronics double beam UV-Visible spectrophotometer offers a 190-1100 nm range with adjustable bandwidth for versatile analysis. Its Silicon Photocell detector, deuterium and tungsten lamps ensure precision. The 8-inch touchscreen and advanced features streamline operation and data analysis.
https://www.labotronics.com/double-beam-uv-visible-spectrophotometer/lb-20dbs
#DualBeamUVSpectro,
#DualUVSpectro,
#UV-VISspectro
Slide Dryer LB-11SD
Labotronics slide dryer offers adjustable temperature up to 90°C, providing optimal drying for and efficient sample preservation. It utilizes a responsive controller for precise temperature management. The advanced heating system ensures even drying throughout. Maintains the set temperature automatically, delivering consistent and reliable results.
Seed Germinator LB-22SGG
Labotronics seed germinator, designed with a 400 L capacity, provides optimal conditions for seed germination. It offers day-night cycle simulation, forced convection, and double-layer isolation. A programmable PID system ensures precise control, while multi-section settings enhance operational safety and reliability.
Seed Germinator LB-10SGG
Labotronics seed germinator with a 2040 L capacity, supports seed development in controlled environments. Its automatic cycle manages water supply, absorption, drainage, and cultivation efficiently. Designed for versatility, it replicates natural conditions to ensure exceptional germination results.
Sample Concentrators LB-30SC
Labotronics sample concentrators process up to 12 samples with precise microprocessor control. Independent nitrogen flow, adjustable up to 15 ml/min at 200 kPa, ensures fast evaporation. Dual block water bath heaters maintain consistent temperature, while the liquid level sensor ensures accuracy. The dry heat alarm enhances safety for reliable concentration.
Sample Concentrators LB-22SC
Labotronics sample concentrators offer precision microprocessor control for efficient handling of multiple samples. Each needle features adjustable nitrogen flow up to 330 ml/min at 33 to 69 kPa for optimal solvent evaporation. The 150 mm needle design minimizes splashes, while dual heating blocks ensure steady, uniform concentration. This system ensures reliable and high-performance results.
Sample Concentrators LB-20SC
Labotronics sample concentrators process up to 16 samples with advanced microprocessor precision. Each needle features independent adjustable nitrogen flow up to 15 ml/min at 0.01-0.05 MPa for efficient evaporation. The 150 mm needle ensures splash-free operation and precise results. This setup provides consistent and reliable sample concentration.
Sample Concentrators LB-13SC
Labotronics sample concentrators offer advanced microprocessor control for efficient multiple sample processing. Each needle allows adjustable nitrogen flow up to 15 ml/min and 0.1 MPa, ensuring rapid solvent evaporation. The 150 mm needle length is designed for splash-free operation, delivering precise concentration. This setup provides reliable concentration performance.
Sample Concentrators LB-12SC
Labotronics sample concentrators provide precise microprocessor control for handling multiple samples. Each needle features customizable nitrogen flow up to 330 ml/min and 33 kPa for efficient solvent evaporation. The 80 mm needle length guarantees optimal positioning for splash-free operation. This design ensures reliable concentration and consistently high-quality results.
Sample Concentrators LB-10SC
Labotronics sample concentrators are microprocessor-controlled units for concentrating up to 16 liquid samples. Available with single or double block heaters, they feature adjustable nitrogen gas flow up to 15 L/min and 0.02 MPa pressure. Nitrogen sweeps across 16 gas needles to evaporate solvents at lower boiling points. It prevents liquid splashes and ensures efficient sample concentration.
Nitrogen Evaporator LB-30NE
Labotronics nitrogen evaporator, featuring six sample positions, each with a volume of 200 ml , ensures optimal sample concentration of all through precise microprocessor control. Integrated heated water bath and vortex-type blowing method for controlled ventilation and preserving sample integrity. An LCD screen enables real-time monitoring, ensuring easy operation.
Nitrogen Evaporator LB-20NE
Labotronics nitrogen evaporator, a 24-position microprocessor-driven system, ensures accurate sample concentration. Equipped with a water bath heater and an adjustable nitrogen distributor, it supports a range of experimental needs. The 0-10 L/min inert gas flow eliminates contamination, while the dual-LCD display offers seamless tracking of operational parameters.
Nitrogen Evaporator LB-12NE
Labotronics nitrogen evaporator a 24-position system, offers precise multi-sample processing through advanced microprocessor control. Its integrated heater block and adjustable gas flow of 0-10 L/min ensure contamination-free outcomes. Designed for flexibility, it supports a wide range of experimental needs. The dual-LCD screen enables efficient tracking of preset parameters and operational status.
Automatic NDT Film Processor LB-10NFP
Labotronics automatic NDT film processor can process up to 5 rolls of 60mm to 100mm film simultaneously. It features automatic temperature regulation via a microcomputer chip. Its automatic film detection and chemical replenishment optimize usage, while standby mode reduces power consumption. Our NDT film processor has a roller shaft made of corrosion- and high-temperature-resistant materials.
Gear oil channel point tester LB-10OCP
Labotronics gear oil channel point tester is a microprocessor-controlled unit designed for precise channel point testing of lubricants and vehicle gear oils in both hot and cold conditions. Its built-in temperature control ensures uniform heating throughout the testing process. Refrigeration is achieved via compressors, with flash and buzzing alarms indicating test completion.
https://www.labotronics.com/gear-oil-channel-point-tester/lb-10ocp
Freezing Point Tester LB-11FPT
Labotronics freezing point tester is designed to measure coolant freezing points within a temperature range of -70 to 30°C. It features a 12-liter cold bath and an 80 rpm stirring motor for uniform temperature distribution. Complying with ASTM D1177 and SH/T0090-91 standards, it ensures reliable performance. A 7-inch touch screen enhances usability with an intuitive, user-friendly interface.
Dropping point tester LB-11DRT
Labotronics dropping point tester is a tabletop unit with stepless voltage regulation, tests dual samples simultaneously in an 800 ml glass bath. It features a high-speed stirrer at 500 rpm for uniform heat distribution. The dual-wall glass minimizes heat transfer to the outer surface for safe operation. Compliant with ASTM D566, it ensures reliable and accurate results.
Equilibrium Closed Cup Flash Point Tester LB-30CFP
Labotronics equilibrium closed cup flash point tester ensures quick flash point and burning quality evaluation using advanced semiconductor refrigeration. With electric or gas ignition, it offers flexible and efficient sample analysis. Featuring a rapid-equilibrium method and closed cup design, it ensures smooth operation. Multi-level password protection enhances security for authorized access.
https://www.labotronics.com/equilibrium-closed-cup-flash-point-tester/lb-30cfp
Dropping Point Tester LB-10DRT
Labtron dropping point tester offers diverse range up to 400 °C and predefined temperature 121℃, 232℃, 288℃, and 343℃ enabling accurate testing for various materials. Incorporated with chrome plated grease cup with high sensitive sensors for efficient heat transfer and corrosion resistance. A digital LCD screen for easy and real-time data monitoring.
Automatic Cleveland Open Cup Flash Point Tester LB-20CFP
Labotronics Automatic Cleveland Open Cup Flash Point Tester perform auto stirring, ignition, and testing to determine flash points. It incorporates an adaptive PID control algorithm for efficient heating with electric ignition. The tester provides automatic alerts when set thresholds are reached and cools the sample after testing. Results are swiftly printed using a high-speed thermal printer.
https://www.labotronics.com/cleveland-open-cup-flash-point-tester/lb-20cfp