Ghostbear

Daily life of a bearkitty. Functional grown-up, yet a lil kid at heart.
Lab Tech, Amateur chef, Coffee Connoisseur, Hobby Barista, LGBTQIA+, :neocat_flag_pan: , Furry & cuddle addict. Split between a grown-up, a kidfur and a more crinkly grown-up side. Always fluffy. Always meows!
#TeamScience

2025-05-25

@Serpkah Ich fand's auch cool!Dann werf ich dann extra spicy für dich mit!

2025-05-25

Be gay, do crimes! Or even better: Be queer, do crimes!

Kicking off #PrideMonth a little early!
Got a wonderfully fluffy, cute and yet quite belligerent bearkitty.
I think this year we will see an influx on more combative Pride icons.
Drawny by AzsharaKletete at Bluesky and Furaffinity , thank you very much!

Sascha, the anthro bearkitty, a bear-lynx hybrid with a purple streak in his hair is shown with a bandana, a spraypaint can in his hand 
He has just sprayed a pansexual pride flag on the screen and has a smug, combative grin on his face.
In the background, the rainbow pride flag is shown.
2025-05-24

@bmarinov @Kuraiko Contact was at least quite bad when I got it (We tested that with the marker method and dial indicator).
Which is said to produce uneven grounds. And many coffee enthusiasts like Lance Hedrick and James Hoffman support this and always align their burrs as well.

I don't have a before and after photo, but there was only a section on both burrs that actually had contact with each other. We could see that very clearly.
So we aligned them without grinding coffee in the unaligned state (so the burrs stayed clean).
One of the issues we had was that the burrs were tightened very hard which already warped the burrs a tiny bit (reversible). That was better after we loosened them and attached them with 3Nm and then aligned them.

And now after we aligned both burrs and tested them, I started to season my burrs.
Which is, in my opinion, a very important step for even grounds and a normal level of fines.
But I don't know how much coffee you ran through your burrs so far.
I seasoned mine with ~1,5 kg of cheap beans to take off the uneven edges that all new burrs have.
And now I am ready to send my DF64 Gen1 into hibernation again

Ghostbear boosted:
2025-05-24

And the final result of the stationary and rotary burrs.

Maybe not 100% perfect but the outer edge has now contact all around on both sides.

Also it helped already a bit to loosen the screws and tighten them again with ~3Nm cause they were pretty firmly tighten o.o

@ghostbear2k

#Espresso #coffee

Rotary burr mounted in the chamber, remaining markings of the blue marker are still visible but the edge is clean all around.Stationary burr mounted on the carrier, still visible the remaining markings of the green marker but the edge is clean all around
Ghostbear boosted:
2025-05-24

#Burrs alignment session of @ghostbear2k #DF64 Gen2 #grinder yesterday night. Dunno took a while xD

Excuse the mess.

#coffee #espresso

Messy table with the grinder in the center , tourq wrench, markers, screwdrivers, dual indicator and aluminum foil scattered around.
2025-05-23

@catraxx I think I prefer the English version somehow

2025-05-23

#BattleTech themed games often have an awesome soundtrack.
And it seems the new Ghost Bear: Flash Storm DLC for Mechwarrior 5 Clans is no exception.

That one in particular gives me great Mechwarrior 2 and Ghost Bear's Legacy vibes and I love that.

(and yes, I am partial of the Ghost Bears. Fight me o.o )
youtube.com/watch?v=k6vexhX6NJk

Ghostbear boosted:
Natasha Jay (she/her) 🇪🇺Natasha_Jay@tech.lgbt
2025-05-22
For pride month this year can straight people focus less on "love is love" and more on "queer and trans people are in danger"
Ghostbear boosted:

Final shots:

Badischer Käsekuchen

A special version of the German cheesecake with Schichtkäse which is a special version of Quark which is a fresh cheese but... different.

Made in the air fryer. First try to make a cake in the #airfryer

~Kuraiko

#apronbrothers #cooking #baking #cheesecake #germancuisine

social.neonpaws.digital/@Apron

A piece of a special version of a German cheesecake - Badischer Käsekuchen - in the center of a black rectangular plate with icing sugar sprinkled around.Close up of the piece of a German cheesecake with the focus on the front corner of the piece (the piece is in a 45 degree angle on the plate) in the center of a black rectangular plate with icing sugar sprinkled around.
Ghostbear boosted:

So... Nothing burnt down. Worked out better than I thought.

35mins on 150°C and 5mins on 160°C

~Kurai

#apronbrothers #cooking #baking #cheesecake #airfryer #germancuisine

Ghostbear boosted:
2025-05-21

Aufarbeitung Corona-Pandemie: Gut, dass #TeamVorsicht die Maßnahmen evaluiert, Fehleinschätzungen benennt und neue Strategien für zukünftige Pandemien überlegt. Wo bleibt aber die Aufarbeitung von #TeamRisiko (Precht, Streeck, FDP), die ja haufenweise Fehleinschätzungen geliefert haben? Vom #TeamSpinner („Querdenker“, AfD) ist ja ohnehin nichts zu erwarten, die leben in ihrer eigenen verbarrikadierten Welt

Ghostbear boosted:

I'll start this account now with an experiment xD

No idea if this works...

Badischer Käsekuchen ( #Cheesecake )in the Air fryer...

It's with a special version of Quark which is a fresh cheese but different ;3

Bottom is short pastry then Schichtkäse with sugar, eggs, cream, lemon zest, lemon juice, vanilla extract and topped with crumbles.

150°C for 20 minutes, we'll see how it goes...

Let you know when something burned down.

~Kuraiko

#apronbrothers, #cooking #baking #cake #airfryer

2025-05-20

I really should have planned ahead and gotten a new Pride pic of my fursona... ideally my diaperfur sona. That was maybe a bit silly of me.
Even though I do have some really lovely pics I can reuse, so it is no real problem at all.
Just a "Aww, I should have done that".

2025-05-20
2025-05-20

@tagesschau Klar, er will ja nicht den potentiellen Partner verärgern <.<
Wer so weit rechts steht wie das Doof-Rind, der kuschelt halt auch gerne mit Nazis.
Aber gut das er das am Ende nicht zu entscheiden hat.

2025-05-20

@d @tagesschau Das ist wieder eine ganz andere Baustelle und ein eigenes Thema.
Ging erst mal nur um die Umweltbilanz. Und die fällt positiver aus.

Ob man das nun möchte ist dann die eigene Entscheidung. Und man muss auch ein bisschen schauen was man nun mit welchem Produkt ersetzen möchte. Denn häufig ersetzt man etwas prozessiertes mit etwas anderem prozessierten. Und selbst da gibt es bei den Ersatzprodukten noch Unterschiede.
Aber wie Du schon sagst, die Entscheidung liegt bei jedem einzelnen selbst. Ich möchte mir da auch keine generelle Beurteilung anmaßen

Rein persönlich verwende ich die Produkte manchmal ganz gerne, um ein gewisses Craving zu befriedigen für ein Fleischprodukt was ich selbst nun nicht mehr esse. Es schmeckt natürlich nicht genauso, und ich möchte es auch nicht übertreiben, aber es füllt für mich die gleiche Lücke. Deswegen finde ich es für mich, rein persönlich, auch mal praktisch.
Aber gleichzeitig will ich es auch nicht übertreiben.
Ich koche selbst sehr gerne mit frischen Produkten und Zutaten, koche gerne mit dem was ich habe, ohne das Ziel zu haben etwas 1 zu 1 zu ersetzen.
Und ich verwende z.B. auch extrem gerne Tofu, aber nicht als Fleischersatz, sondern als eine eigene Zutat mit ganz eigenen Eigenschaften.

Aber das ist alles nicht allgemeingültig und ich möchte vermeiden anderen Leuten in ihre Ernährungsgewohnheiten reinzureden.

2025-05-20
2025-05-20

@d @tagesschau
Tun sie, so wie das aussieht.

Ein Artikel vom Umweltbundesamt:
umweltbundesamt.de/presse/pres

Und das war mehr oder weniger das erste was mir über den Weg gelaufen ist.
Es gibt sicher noch mehr Artikel und Studien dazu, aber ich hatte jetzt nicht so viel Zeit etwas mehr in die Tiefe zu suchen:
knowablemagazine.org/content/a.

Ghostbear boosted:

My small wish for agender pride day:

Stop gendering clothing.

Start making a variety of styles in many colors, cut for different bodies, and label them as such. All clothes are gender neutral.

(My big wish is end the patriarchy, of course, and binary thinking.)

#AgenderPrideDay

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst