Working on something new. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Now that I’ve got a black primer coat applied to the #Defiant, I can finally see all the areas I’ve missed with the milliput and where I still need to scribe some gridlines. #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #ScaleModels #MKMModelwerx

1/1400 scale #Odyssey class USS #Enterprise NCC-1701-F #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

The commission I've been working on for the last couple of months can now be revealed.
.
.
.
.
.
.
The #Odyssey class USS #Enterprise NCC-1701-F. Pics coming shortly. #StarTrek #StarTrekModels #ScaleModels #MKMModelwerx

Some don’t like the #Inquiry class, but I’ve always loved it and wanted a model but there was never any in 1/1400 scale, so I bought the 1/2500 one by valkyrie013 on cults3D and scaled it up. I’ve started milliput and sanding but I won’t be able to do it with the entire model or I risk removing some detail. #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #MKMModelwerx

The 1/350 #Defiant doesn’t have most of the grid lines, so I used the 1/1000 version as a guide and pencilled in the lines before scribing them into the plastic. It’s not perfect but it’s good enough. #StarTrek #StarTrekModels #ScaleModels #MKMModelwerx

#Defiant’s starboard nacelle has been sanded, glued into place, LEDs wired up, closed up and lights tested. Port nacelle next. #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #MKMModelwerx

Got milliput applied to Defiant’s nacelles and painted the bands on the bussards copper. #StarTrek #StarTrekModels #MKMModelwerx

#Defiant’s nacelles have finished printing, supports removed and test fit. Another comparison pic with the 1/1000 scale version. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Light test of the #Defiant build so far. #StarTrek #StarTrekModels #ScaleModels #MKMModelwerx

Printing progress of the #Defiant’s nacelles. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Had to scribe the panel lines on the #Defiant’s bridge section as there were none, using a 1/1000 scale version as a reference. Will probably have to do this with most of the model. #StarTrek #StarTrekModels #MKMModelwerx

While I wait for the two nacelles to print, here’s a size comparison of the 1/350 #Defiant and 1/1400 #Galaxy class. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

More painting of the #Defiant parts and starting modifications. #StarTrek #StarTrekModels #ScaleModels #ModelBuilder #MKMModelwerx

Another new commission. 1/350 3D printed USS #Defiant. Shuttlebay painted while I print more parts. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

Taking another break from milliput/sanding on the commission build, so I’ve wired up the LEDs in its secondary hull and nacelles and completed assembly. Just need to finish milliput/sanding the saucer before i can start wiring up the lights and finish assembly so I can begin paintwork. I’ve also done some detail painting on the 1/650 Daedalus class (pictured). #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

Another round of milliput applied to some areas of the #Olympic. #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

Finally got round to sanding the milliput on the #Olympic. I’ve given it another coat of black to show up areas that need more milliput (and there are still a few). #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

All parts for the Type 11 shuttle has been printed. I’ve done a test fit and size comparison with the 1/1400 Galaxy Class USS Arcadia. #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

Last night the starboard side of the aft compartment finished printing. Unfortunately, the supports in the wire tunnels refused to budge, so I had to come up with a workaround. #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx