#FNIRSI

2025-06-05

Neues Spielzeug ist vollzählig. Jetzt muss ich mir nur wieder irgendeinen Quatsch ausdenken um zu begründen dass ich die Dinger unbedingt "gebraucht" habe... 🤓
#Voltcraft #Fnirsi #Owon #Uni-t
#Elektronik #Messgeräte

Messwerkzeuge für Elektrik / Elektronik
in_sympathyin_sympathy
2025-05-26

Fooling around with some of my toys. This time decided to tune an oscilloscope probe a little.

Do I recommend them? Meh, for the
price - absolutely.

They do work, but don't expect miracles in terms of accuracy and carefully read the specs. For example I got pissed trying to measure an inductor and TC3 measured it as resistor and TC4 measured it as a capacitor 😂. However inductor is less than 10 uH, so neither of the devices actually was supposed to measure it 🤷‍♂️.

2025-02-10

Измерительный пинцет DIY YCHEV001 на Arduino

Сегодня мы с Вами соберём бюджетный вариант Китайского измерительного пинцета FNIRSI LCR-ST1. В качестве базы я выбрал Arduino, так как целью проекта стало сделать схему, как можно проще, что бы повторяемость измерительного пинцета среди зрителей канала youtube.com/@chevichelov была на уровне " Контролька на Arduino ", по этому я упростил схему насколько это возможно, а в качестве измерительных алгоритмов выбрал самые простые, но в то же время самые надёжные из них. По предложению Хабралчан дал измерительному пинцету название YCHEV001. Прежде чем перейдём к схеме, давайте быстренько пробежимся по функционалу измерительного пинцета: Вес измерительного пинцета

habr.com/ru/articles/881170/

#измерительный_прибор #Fnirsi #Измерительный_пинцет #YCHEV001 #chevichelov #FNIRSI_LCRST1 #diy #diy_или_сделай_сам #DIY_YCHEV001 #diyпроекты

in_sympathyin_sympathy
2024-11-28

Since it’s in again - time to fix a small that I bought as broken months ago.

Originally it had a cheapest that got HOT and same level batteries - 8/12 were dead when I got it.

I replaced batteries with proper 3000+ mAh ones wired in 3S4P and a 40A BMS - now it stays stone cold and should power my router for 10-12 hours.

Spot welded it today during blackout and soldered with my powered by 😆.

2024-11-16

FNIRSI DSO-TC3 la herramienta multipropósito más completa para electrónica

Un dispositivo portátil para medir componentes pasivos y activos, osciloscopio digital, generador de señales y herramientas para medir voltajes, continuidad, sensores de temperatura y humedad, códigos de emisores infrarrojos y más.

El instrumento DSO-TC3 resulta extremadamente versátil como probador de componentes ya sean resistencias, capacitores, diodos, transistores. Incluye un osciloscopio digital para visualizar señales, un generador de señales senoidal, cuadrada y más.
También herramientas útiles como ser un probador de continuidad, medición de voltaje DC, conectar sensores de temperatura y humedad digitales y más, todo en un dispositivo portátil a batería recargable de litio.

#fnirsi
#dsotc3
#osciloscopio
#bitwisear

Enlace de compra en Aliexpress:
s.click.aliexpress.com/e/_opvt

youtube.com/watch?v=7fV7mlq0dZ

2023-12-31

1013D 7-inch Digital 2 Channels Tablet Oscilloscope 100M Bandwidth 1GS/s Sampling Rate 800x480 Resolution Capacitor Screen Touch + Gesture Operation Oscilloscopes
banggood.com/FNIRSI-1013D-7-in

івась тарасикtivasyk
2023-01-21

заздріть …якщо розумієте, про що я ;-)

@rada

мініатюрний цифровий осцилограф fnirsi 138 pro, заживлений від павербанку anker, на тлі інструкції користувача fnirsi й кількох деталей набору freenove hexapod.
Þór Sigurðssonthor@mast.ttk.is
2023-01-12

Have. The input isn't very accurate (noise) but for that extra channel you didn't have, it could be a lifesaver.

And it's small enough to get a permanent home in my already over-full toolchest.

And believe it or not, it has a built-in signal generator.

For about US$20.

#FNIRSI #oscilloscope #signalgenerator

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst