aun queda tiempo para un screenshot + de #ViernesDeEscritorio , y esta vez recuperando mi #VisionFive2 , aunque no he podido arrancarla desde #nvme 😢. Si alguien puede echarme una ✋, se lo agradecería mucho...

Oh wow thats impressive 😲 Got @nextcloud running on a #VisionFive2 #RiscV home server with #NixOS 🥳

Once again I faced with the following error trying to boot GNU Guix from a MicroSD card on my VisionFive2 board:
waiting for partition '31393730-3031-3031-3139-343934363833' to appear...

Interestingly, I was able to boot to this image just few days ago. It seems that the difference is just in the u-boot parameters:
https://codeberg.org/guix/guix/pulls/4855#issuecomment-9013290

#guix #riscV #visionfive2

RE: https://social.project-insanity.org/@pi_crew/115729577340262094

#VisionFive2 #riscv #VisionFive #nixos setup.

So now I can boot straight into a barebones GNU Guix system on my StarFive VisionFIve 2 RISC-V board from a MicroSD card. I had to patch "gnu/bootloader/u-boot.scm" in Guix to make this work:
https://codeberg.org/avp/guix/src/branch/avp-visionfive2

No success with eMMC yet; it would be nice to create an image that works with eMMC as well.

#riscV #guix #starfive #visionfive2

@liliputing_ #RISCV small #SBC single board computer #VisionFive2 #visionfive2lite

https://www.kickstarter.com/projects/starfive/visionfive-2-lite-unlock-risc-v-sbc-at-199

The shift management web app Oncall which is already integrated into #NixOS is now also successfully ported to #RiscV 🥳 Running on the #VisionFive2 board with mainline kernel

Unser VerwaltungsTracker.de, welcher auf der Software des Koalitionstrackers von @fragdenstaat basiert, wurde auf die freie #RiscV Prozessor-Architektur portiert und läuft jetzt auf einem #VisionFive2 board unter #NixOS 🤩

I tried to boot debian 13 rc1 image #riscv on #visionfive2. Fiddling around (load fdt and kernel) in u-boot gives you the installer. Then installed it on nvme. But as expected no hdmi. Same with alpine-linux. I didn't manage to build a custom kernel yet and using HDMI output.
Hints are very welcome.

Tried to run "guix pull" on my VisionFive2 board with the configured offloading. Everything went smoothly at first but then the Guix daemon on my main x86_64 machine went down with a SEGFAULT; I tried to restart it, but it failed with SEGFAULT again. Had to reboot the system to fix that. Not sure why it happened.

Then I tried to build the rest of the packages on VisionFive2 and found out that OpenSSL 1.1.1l tests fail as is shown on the attached screenshot.

#guix #RISCV #visionfive2

I managed to run Debian GNU/Linux on VisionFive2, using the following instruction:
https://rvspace.org/en/project/VisionFive2_Debian_User_Guide

It runs from a 64GiB MicroSD card, the board boot mode is SDIO.

Next I'm going to try to run GNU Guix from a MicroSD card as well. I've already tried to run Guix on VisionFive2 using an eMMC but this try was only partially successful:
https://fosstodon.org/@avp/114589645768050312

#visionfive2 #riscv #debian

I managed to run GNU Guix from eMMC on VisionFive2 board.

The image is built from "gnu/system/images/visionfive2.scm" manifest and is written to an eMMC with "ddrescue".

Also I had to switch the boot mode into QSPI and run those command on boot:

setenv fdtfile starfive/jh7110-starfive-visionfive-2-v1.3b.dtb
saveenv

It runs but the boot process stops with "failed to resolve partition" error.

#RISCV #VisionFive2 #guix

Right, it even runs without any issues on slow #rv64 hardware like my #visionfive2 board.

If anyone is looking for compiled bins of snac for #RISCV
- https://cdn.gyptazy.com/files/os/debian/snac/
- https://cdn.gyptazy.com/files/os/freebsd/snac/

@ltning @ploum

I really need to setup a crossbuild environment for #pkgsrc ...
Building rust which is a dependency for ansible on the #VisionFive2 is now in its third day of building and I'd like it to be done by Friday ^^'
#riscv #riscv64 #NetBSD #SBC #OpenSource #opensourcehardware #build

Currently installing some software that I need from #pkgsrc source distribution since of course there is no binary release just yet 😗
#netbsd #opensource #build #technology #sbc #VisionFive2

So since the irradium #Crux #Linux derivate on my #VisionFive2 was broken (didn't boot anymore without any errors, just froze) and I never liked this distro anyway I was looking for alternatives... and for some reason the @netbsd generic "qemu" image... just booted and installed out of the box xD
#RISCV #StarFive #riscv64 #SBC #opensource #netbsd #bsd #freedom

Awesome! Feel free to join and snac runs perfectly fine on a RPi! I built #snac for #RISCV (for my #Starfive #visionfive2 board) which even runs there pretty smooth :) also @grunfink is doing an absolutely great job as the dev behind the snac project.

@emb

RISC-V can already be used in an every day scenario - but it highly depends and needs some special love.

If you're interested, I used VF2 boards in production.

* https://gyptazy.com/starfive-visionfive2-the-perfect-risc-v-board-for-ubuntu-review/
* https://gyptazy.com/running-a-risc-v-based-production-tor-relay-node-for-the-onion-network-with-the-visionfive2-board/

@kura #rv64 #riscv #rv #starfive #visionfive #visionfive2

5) Unmount the SD card and boot it.

doas umount /mnt

You should be able to see it boot from a debug UART

#Linux #VisionFive2 #RISC-V #AlpineLinux

ใครที่ยังอยากเล่น RISC-V แบบไม่มี vector (RVV) ตัวนี้ยังถือว่าคุ้มสุดนะครับ ประสิทธิภาพในการ build package นี่ยืนหนึ่งมากๆ

https://th.cytron.io/amp-p-visionfive-2-single-board-computer

#VisionFive2