#Compressor

TomKrajci 🇺🇦 🏳️‍🌈 🏳️‍⚧️KrajciTom@universeodon.com
2025-06-15

Before I do more work at the tail end of the glider's fuselage (install the tail water ballast tank), I want to get most of the debris out of the tail boom. When I rotate the fuselage, it sounds like a pair of maracas.

I have an access hole in the aft battery box bulkhead, so I connected the shop vac hose to the exhaust side...to get all the air moving out of the tail boom at a good clip, then inserted the compressor hose at 100PSI to knock debris loose and give it a kick.

#AvGeek #Aviation #ElectricAircraft #ExperimentalAviation #Homebuilt #Glider #DIY #Vacuum #Compressor #Dust #Clean

Looking at the tail boom from the forward end. The battery box door has been removed and a wide diameter, low pressure air hose has been inserted into the tail boom. I'm holding an air compressor hose fitting that blasts high pressure air...in order to loosen debris inside the tail boom. This, hopefully, will remove most of the debris from the tail boom.
Christiaan KrasHtbaa@fosstodon.org
2025-06-12

OK #Compressor, but why?

No issues with #HandBrake though...

#Apple #MacOS

Error screen from the software Compressor, unable to convert a file. The error is saying "Failed: 3x The operation could not be completed".
🔊🎶 N U N DNUND@troet.cafe
2025-06-11

3 GREAT FREE Plugins in 10 Different Categories:

EQ, COMP, REVERB, DELAY, CHORUS, LIMITER, DRUMS, BASS, PIANO and SYNTH
youtube.com/watch?v=dSEnVnLCUu

#PeaceLoveMusic #Compressor #Reverb #Delay #Chorus #Limiter #Drums #Bass #Piano #Synth #VST #Plugins #MusicProduction #DAW #Equalizer

Christiaan KrasHtbaa@fosstodon.org
2025-06-09

OK #Compressor, so why can't you open this file? #HandBrake can process it just fine and Preview, QuickTime and anything else can play the video as well.

I thought Compressor was the one app to rule them all for converting video files? But it can't handle A-Law 2:1, H.264.

#Apple #MacOS #AppleCompressor

Error dialog from Compressor, unable to open a video file
2025-06-03

Heritage Audio präsentieren mit dem P.Lane Type 436 ist der Nachbau eines beliebten Vari-Mu-Kompressors der Sechzigerjahre mit Twist.

Mit dem P.Lane Type 436 veröffentlichen Heritage Audio einen kompakten Nachbau des Altec 436C. Dieser kam in den 1960ern auf den Markt und war aufgrund seines Röhren-artigen und musikalischen Klangcharakters beliebt. Die neue Version des Vari-Mu-Kompressors bildet den originalen Charakter nach und wurde um ein paar Features bereichert…

[…]

https://soundchills.de/heritage-audio-plane-type-436/

Heritage Audio P.Lane Type 436 Vari-Mu Kompressor
Alberto Rizzo Schettino 🎼arizzoschettino@corteximplant.com
2025-06-02

We get together and find out what XBus, by Kiive Audio, is all about. It's over 40 minutes of master class, covering all there is to know on this plug-in and, most important, the trick to really unlock its potential.

👉 patreon.com/posts/130528888

🤖 #musicproduction #mixing #mastering #kiiveaudio #plug-ins #audioplugins #compression #compressor #xbus

2025-05-19

FirComp2 FREE Compressor Linux/Windows/Mac | EN

A really good, clean and lightweight Compressor and Limiter and more


#FirComp2 #Compressor #Bitwig

Youtube Thumbnail
2025-05-19

FirComp2 FREE Compressor Linux/Windows/Mac | DE

Ein sehr guter, cleaner und CPU freundlicher Compressor und Limiter und mehr


#FirComp2 #Compressor #Bitwig

Youtube Thumbnail
Michael Gisiger 📷gisiger@pixelfed.social
2025-04-29
#30Days30Watches Day 29: Dan Henry 1970 #compressor #diver (ltd. ed.)

I felt that some of the #watches in my collection were not being worn enough. So last month I wore a different one every day and took a picture of each one. This month I will post a picture every day.

#watch #wristshot #WatchesOfPixelfed #wristwatch #dailywatch #30DayChallenge
Amadeus Paulussenamadeus@mstdn.social
2025-04-24

I just added the #kazrog Retro Sta-Level #compressor to my arsenal at amadeuspaulussen.com/blog/2022
Make sure to try one of my presets that ship with the plugin! 🤓
So happy that Kazrog are coming to #linux. 🥳
kazrog.com/collections/audio-p
#linuxaudio #plugin

Kazrog's Retro Sta-Level plugin with one of my presets loaded. 😜
2025-04-24

Are there any #Bitwig v4.0+ users out there who might want try out my #Drawmer1973 inspired #Multiband #Compressor preset? If interested please leave a comment. What’s a Drawmer 1973? This - drawmer.com/products/70s_serie

2025-04-24

こんぶを換えてみた 羅臼もいーが利尻もいー
まー軽くしかかけないんだけど1176が安くなっていたんで
#Compressor #UNIVERSAL_AUDIO_UAFX1176 #Guitar

2025-04-24

こんぶを換えてみた 羅臼もいーが利尻もいー
まー軽くしかかけないんだけど1176が安くなっていたんで
#Compressor #UNIVERSAL_AUDIO_UAFX1176 #Guitar

Y⃒̸̷̝̜̙ͥͥͥngmaryngmar@social.tchncs.de
2025-04-17

Checked out the compressor. The pressure switch wasn't the problem, but at least it's adjusted now. And the PRV tested 😤

Looks like the motor capacitor is getting lazy. Not unusual, but a bit annoying given that this thing is maybe a year old and not used heavily.

Perhaps they used the wrong element. SeaKnight instead of AirKnight :blobcatdizzy:

#Repair #Air #Compressor #DIY

Close-up of a black plastic box with red knob on top, which houses a pressure switch for switching the compressor on when the air pressure drops below a threshold, and off again when it reaches another one that should be around 8 bar. There's also a red regulator knob and two gauges. On the right is a standard air hose coupling, on the left a red plastic cover for the pump.Close-up of a large white motor run capacitor popped out of its black housing underneath the compressor pump. The cables are still attached. The label reads SeaKnight CBB60 30μF 450V.
2025-04-09

and now its playing its calming tunes again... Only a minor leakage is ruining the thumbing sounds.

#tools #compressor

2025-04-04

Ich habe mir jetzt auch mal ein #Pedalboard für den #Bass geholt und zusammengestellt. Mein #Verzerrer (#Darkglass AO) und ein neuer #Compressor (Joyo Scylla) sind drauf.

Hauptgrund war tatsächlich, dass der Darkglass keine Batterie hat und ich keinen Bock auf noch mehr Kabel hatte..
😄 Deshalb lag die Zerre ewig rum, obwohl sie nicht ganz günstig war. Also hat mein neues Pedalboard jetzt einen großen Akku drunter geschnallt. 😊

Damit es nicht so leer ist, habe ich mir noch einen recht günstigen
#Compressor geholt. Das ist das erste Mal, dass ich so einen nutze, aber YT wies mich recht deutlich darauf hin, dass man so einen durchaus haben will als Basser.. 😁
Und in der Tat: Der Unterschied ist nicht riesig, aber doch gut hörbar. Sehr angenehmer gleichmäßiger Sound!

Eine
#Frage an die Pedalboard Bauer hier: Compressor vor oder nach der Zerre einstöpseln? Meinungen? So weit ich verstanden habe:

* Wenn nach der Zerre, dann würde er potentielles "Leerrauschen" des Verzerrers anheben, wie jeden leiseren Sound.
* Wenn vor der Zerre, verliert man die Dynamik des Verzerrers, der ja auf unterschiedlich starke Anschläge reagiert.

Ersteres scheint bei mir Null Problem zu sein, deshalb ist der Compressor bei mir jetzt hinter dem Verzerrer.

Wie auch immer: Der Darkglass ist einfach der Hammer. Ich habe seit dem ständig zwischendurch den Bass in der Hand und spiele, weil das üben mit dem Sound einfach total Bock macht!
🤘😄

Ein kleines Pedalboard (Metall Schiene mit Durchlässen für Kabel usw, auf die man Effektgeräte für Instrumente installieren kann), auf dem man drei Metallkisten mit Schaltern und Drehknöpfen sehen kann: Ein weißes Stimmgerät, einen roten Comressor und einen stahlblauen Verzerrer. Davor liegen zwei Plectren dahinter sieht man einen Kopfhörer und zwei kleine Funkgeräte für Gitarren.

Client Info

Server: https://mastodon.social
Version: 2025.04
Repository: https://github.com/cyevgeniy/lmst