Lmst

Schutzblechhalterung kaputt. Dank #3ddrucker #ender3v2 schnell was aus TPU gebastelt, und gleich noch einen #natenom Spritzschutz dazu.

Fahrradvorderrad: Nahaufnahme von hinten, Reifen, unteres Ende des schwarzen Schutzblechs, silberne Haltestange, schwarzes Gummiknubbel als Halter, darunter ein schwarzer Spritzschutz, darauf durchscheinend der weinende Natenom-Elefant. Im Hintergrund ein Schotterweg

Went back to a 0.4 nozzle tonight and in the process I bumped the bed out of alignment. This is the worst part about older #3dprinters. Even with mesh leveling firmware, it can only handle so much skew before you have to manually adjust the bed screws. Tomorrow is going to be a fun day spent re-leveling the bed.

#ender3v2 #3$printing.

Weekend fun project 😎 - #robotArmMK2Plus #ender3V2 #3dprinting #project #3D

Another successful print #3Dprint #3Dprinting #3Ddruck #AppleWatch #creality #Creality3D #ender3v2

Model: https://www.thingiverse.com/thing:828700

A white accessory stand with a circular charging pad and a cable attached, positioned on a flat surface.

An Apple Watch with a red band displaying the time as 14:39 and the date as Friday 10, resting on a white charging stand. A battery icon indicates charging.

A smartwatch with a black face and bright green display time of 14:39, mounted on a white charging stand. The watch has a red strap.

A partially finished 3D print of a small object, featuring a bulbous shape with a narrow neck and a circular top. The print is white and sits on a metal surface, showing strands of filament from the printing process.

Mich ärgern ja schon eine ganze Weile meine Overhangs, obwohl ich extra eine neue Satsana Fanshroud gedruckt habe. Hätte ich mal diesen Australier und sein „dunny paper“ vorher gefunden. https://youtu.be/rr2ZTZOgFAo?si=u1elml4YbdxvNug3 #3dprinting #ender3v2

My #3DPrinting lab is all setup and ready to go! FDM on my trusty ol' #Ender3v2 #3DPrinter and #Resin #Printing on an #Anycubic #PhotonM7 Max (which I've yet to break in).

New #3DPrinter is here! The #Anycubic #PhotonM7 Max. it's huge! I can't believe how tiny my #Creality #Ender3v2 looks next to it. Let the fun begin! My first #Resin #3DPrinting experience!

After we got our #Bambu #P1S printer I have printed out more things than I did before we got it. Before this I had a #Ender3v2 and before that a #Monoprice printer that only printed PLA. But dear wholy, nothing has gone wrong, only prints that have failed were because of the design (pegs not joined with the body in one #Skadis thing I made).

So this is the feeling other 3D printing people have been feeling all the time? I love it!

Funny thing. I ordered a #BambuLab #P1S #3DPrinter some days ago, then 3 days later I ordered some #Filament from them as well. These are a Friday and a Monday. Both are shipping from Germany and guess what package is going to be delivered today?

You guessed it, the filament!

But it's fine, I'm just really looking forward to using the new printer and selling my #Ender3v2

Those settings made me shiver a bit, but so far it mostly works. (the hotend yanked on part nearly of the bed, but ironed it mostly back in the later layers. lets see if it's usable)
#3dprinting #ender3v2

Speed for Print Moves
Default speed: 100 mm/s (for %-based speed adjustments).
Internal: 150 mm/s for internal parts of the model.
Solid: 200 mm/s for solid layers.
Default (Infill): 120 mm/s for general infill areas.
Bridges: 140 mm/s for bridge areas.
Gap fill: 30 mm/s for filling small gaps.
Thin walls: 80 mm/s for narrow walls.
External: 80 mm/s for outer perimeter.
Sparse: 300 mm/s for sparse infill.
Interface: 100 mm/s for support interface layers.
Top solid: 60 mm/s for the topmost solid layer.
Brim & Skirt: 50% of perimeter speed.

Acceleration Control (Advanced)
Default acceleration: 1500 mm/s², controlling general extrusion rate changes.
Internal: 800 mm/s² for internal infill.
Solid: 2000 mm/s² for solid areas.
Default (Infill): 3500 mm/s² for general infill.
Bridges: 3000 mm/s² for bridging areas.
Gap fill: 1000 mm/s² for small gaps.
External: 750 mm/s² for outer perimeter.
Sparse: 3500 mm/s² for sparse infill.
Interface: 3500 mm/s² for support interface areas.
Thin Walls: 750 mm/s² for thin wall sections.
Top solid: 1000 mm/s² for top layers.
Brim & Skirt: 1000 mm/s² for these areas.

Feeling nostalgic, printing a #3dbenchy on my fist 3D printer just to see if he is still working.
#3dprinting #creality #ender3v2

One of the best things I bought for my 3D printer.
CR Touch Auto Leveling Kit.

The hardware is pretty easy to install, updating the firmware is what took some time. It was real clear which firmware to use, and a couple didn't work at all.

I've only printed two things so far, but it is impressive what can be done when it makes adjustments for the bed. And I was pretty sure I had the bed level to start with.

#Creality #Ender3v2 #AutoLevelKit #CRTouch #3dprinter #3dprinting

Creality CR Touch Auto Leveling Kit new in box.

Thinking about placing my #Ender3v2 and a #RaspberryZero2W running #Octoprint in the guest bedroom so I can remotely manage it rather than not using the printer at all since I *have* to have 2 fans running and the window wide open during the heat here now.
At least there is no movement of air in there and heat fluctuations as in the office.

There are soooo many things I want to print =/

@LeonianUniverse
I think you need someone with #ender3v2 (or just #ender3) experience too (not me)...

Anyone know how to remove a bowden tube from an Ender 3 v2 Neo? It has a plastic collet and clip instead of a threaded retainer.

The blue clips come off easy, but the black collets do not budge no matter how I squeeze, pull, push, twist, bend, or pry. I ended up breaking them. Ordered some replacements, and I need to know how to do this properly. #3dprinter #ender3v2

Printing two of the Ice Dragons.... on using the Rainbow PLA, the other using Blue PLA. Both humming along.....

#3dprinting #3dprinter #MonopriceIIIp #Creality #Ender3v2
#Flashforge #Inventor

Monoprice IIIp clone of the Flashforge Inventor 3d printer.... printing another Ice Dragon

Creality Ender 3 v2 with blue filament just starting to print an ice dragon

Hi everyone. Has someone ever saw such an issue with 3D Printing? I have invested hours in troubleshooting and still no progress. It is most of the time the 3rd layer and the first layer is perfect.

I use PETG+ from ACTIVEME at 230/70C° with 6mm retraction and the Ender 3 V2 Neo 0.15mm layer height at 100mm/s printing speed

The fillament is fresh newly opend so it is not humidity.
In the past i printed perfectly fine with the same fillament.

#3dprint #3dprinter #Ender3V2 #gcode #PETG

Typically I don't modify my 3D printers, in this case thou, a simple mod will probably keep the filament from getting into the Z axis screw.
One of the few things I questioned when I put together the Creality Ender 3 v2 - I was sure I had put it together wrong, when of course my first prints had the filament running into the screw. I'm glad to see I'm not the only one, and that I did put it together right.

#3Dprinter #Creality #Ender3v2 #Mod #Filament #Thingiverse

simple 3D printed filament guide to keep it from the getting into the z axis screw on an ender 3 v2. Sorry for the poor quality picture.

Another view simple 3D printed filament guide to keep it from the getting into the z axis screw on an ender 3 v2. Sorry for the poor quality picture.

The filament guide on the ender 3 v2 3d printer

#FrostPendeln #mdrza #natenom #lampertheim #weschnitzinsel #sonnenaufgang #ender3v2 Der Elefant ist vorne auf dem Schutzblech dabei.

I'm giving my first 3d printer (an Ender 3 V2) to a family member. To make things simple I wanted to de-klipperize it and put the screen back on.

I was preparing to put the latest official firmware from 2022 on it but decided to see if there was anything better out there. To my surprise, there's still custom firmware being maintained and it's got a lot of really nice features!

https://github.com/mriscoc/Ender3V2S1

#3dPrinting #Ender3v2

#Ender3V2

Client Info