Lmst

How To Print PETG as Transparently as Possible https://hackaday.com/2025/11/29/how-to-print-petg-as-transparently-as-possible/
#3dPrinterhacks #3dprinter #3dprinting #PETG

DasFilament has launched a recycled PETG filament made from film production waste. This rPETG has the same properties as their standard PETG and has been specifically designed to produce unique colour changes. It is available in spools and refills.

➡️ https://www.dasfilament.de/filament-refill/petg-1-75-mm/917/rpetg-filament-1-75-mm-abrakadabra-1-kg-refill

#3dprinting #filament #petg #dasfilament

A refill spool of rPETG in the center of a white page with colour changing in the violet range. On top the title a title in black "Recyceltes PETG".

A close up of a refill rPETG spool on white background. We can see the color changing from brown to black to violet.

A text in German with four spools in the background. Deepl translates the text in English as follows:
"For a long time now, the waste that inevitably arises during film production has been a thorn in our side. We have now succeeded in recycling this waste and using it to produce filament that is of the same quality as our other filaments."

A text in German with a column of rPETG spools in the background. Deepl translates the text in English as follows:
"We design the production of rPETG in such a way that, instead of a uniform "colour paste", unique colour changes are created. We are starting with spools and refills in PETG (1.75 mm). The colours vary and are selected at random for shipping."

Anyway, it snaps in place a little loosely, but during normal use it doesn't come loose. I'd say it's a win!
Now let's see what happens the next summer, with higher temperatures... #petg is more heat resistant than #pla, but will it be enough?

The #3Dprinted part is similar to the original one, but it seems a little bigger. May it be due to the material shrinking? I printed it in #PETG because i can't print #ABS safely, maybe the designer designed it for ABS?

The little ghost is coming together nicely :)

#3dprinting #3dprint #makerworld #halloween #ghost #glow #petg #bambulab

Endlich seit langen wider mal gedruckt.

#3dprinting #petg #ancubicvyper #klipper #timelapse

Well, my last test prints with the material combination of #PETG and #BVOH (for the support interfaces) turned out very well, after proper drying of both filaments and printing with a single nozzle #BambuLab #X1C. It took quite a bit of fine-tuning in the settings, but now it seems to be working. I am now printing one of the two complicated models in its entirety, the monitor stand for the #NeXT #MegaPixel display.

#3DPrint #3DPrinting #RetroComputer #VintageComputer #NeXTComputer

Rendering of the monitor stand from side behind. One can see the ribs which spans over the entire surface. These are the problems when it comes to print with FDM.

Screenshot of the printer camera printing the NeXT MegaPixel Display stand. There are just a few layers printed atm.

#ProTip:
Using #PVA as an interface filament for supports when printing with #PETG or #PLA, is a total waste of money. Don't use it! ☝🏻

Trust me. I know this. Really.
You're welcome.

#3DPrint #3DPrinting #DrLay

I've done various tests with #BambuLab's "Support for #PLA / #PETG". To be honest, it doesn't deserve its name! This filament is SO DIFFICULT to remove that it's a real waste of money.

Tips for PETG-CF from #bambulabs

1. Run at a slightly higher temperature (5-10°C) for the nozzle and bed
2. Reduce the default volumetric flow rate (about 10-20% lower)
3. Dry your filament
4. Use a gentle detergent to wash any hand oils and residue from the print plate, dry with a microfiber or other lint-free cloth

#3dprinting #petg #petgcf

Does anyone here have experience with #PVA #filament for use with #PETG? Which one would you recommend?

#3DPrint #3DPrinting

@PostnataleAbtreibung I have #Anycubic S1 combo at home and when it prints, it prints cool.

However, I have constant issues with network connection on it (the firmware is shit). ACE also does not fit some 1kg spools, be aware of it.

If you have questions, feel free to ask.

I mostly print #PETG, sometimes #ASA

Printed a vented riser for my new #3Dprinter . Using translucent #PETG . I don't need to store the glass top separately now and it has clips inside for LED lights. If there is one knock I have against the #elegoo Centauri Carbon it's just not bright enough inside, but this will fix that with new lighting.

#PETG on #CryoGrip. It sticks and sticks and sticks... 😃

#3DPrint #3DPrinting

Dear printer, what were you thinking? No love, Jess #3dprinting #petg #prusamk4s

A royal blue print of a board game insert, the final 2 layers of the print are shifted up by approx 4mm and the top is somewhat scruffy&10;

Found this ESP32S3 4.3in capacitive touch screen device on eBay for about $20.00 U.S. - I thought that sounded like a pretty good deal. So Here it is!
I'm thinking of making a US time zone/UTC clock with it - I just need to find the time to sit and do it.

I think I paid $20 for my CYD and I think it has a smaller display.

I also 3d printed a case for it out of PETG

I haven't tried the Arduino IDE but it works fine with #platformio

#ESP32S3 #ESP32 #JC4827W543C #Arduino #3DPrinting #PETG

The 4.3 in Capacitive touch JC4827W543C ESP32-S3 board with 480x270 resolution

A 3D printed simple case for the JC4827WW543C board

The JC4827W543C 4.3 inch touch display running Arduino GFX PDQ test code

@zoufalec
Přesně!

Akorát teda sundat podpěry #PETG je pakárna už s 0.4.. tohle je vysloveně zlo, musel jsem povolat oheň 😀

Jo a došel mi průhlednej filament 7 vrstev před koncem... 😁

Průhledný box na silicu v multimaterialu

3D Printed Giveaway for a labeled Key fob

"deVeer" is the winner

#giveaway #giveawaycontest #sailboat #ericson36 #boatlife #cruising #boatproject #marina #3dprinting #petg #tpu #ender3

PETG-HF is available again, currently.

https://eu.store.bambulab.com/products/petg-hf?id=49068714590556

#BambuLab #Filament #PETG #PETGHF

🚣 Let's see if my #3dPrinted caps hold up! 🤞 It's #PETG so they should stand some UV and temperature.🌡️There's only some residual stock of those valves for the Dinghies of #Wiking #Sport #Schlauchbootwerft for sale on eBay. Company is dissolved since 2017. #DIY #repair @repaircafe_de

#PETG

Client Info