Lmst

a photo of Jo's pedalboard, containing four dpFX builds. Can you spot all of them? 😉
#dpFX #dpFXpedals #pedalboard #boutiquepedals #custompedals #handpaintedpedals #pedalsandeffects #pedaleffects

Custom Patch Bay with DC Thru.

#dpFX #dpFXpedals #handmadeeffects #handpaintedpedals #patch #patchbay #patchmodule #jackpatchmodule #boutiqueeffects #boutiquepedals #greekpedals #custompedals #customeffects #guitarpedals #basspedals #pedalsandeffects #pedaleffects

4 input Stereo Mixer for stereo pedals, compatible with line level signals, can be used for synths as well. Also equipped with AUX mono-sum output. Details in the first comment.
#dpFXpedals #dpFX #stereosummingbox #stereopedals #stereomixer
#stereoeffects #parallelmixer #summingbox #boutiquepedals #pedalbuilder
#handpaintedpedals #handmadepedals #stereopedalboard #pedalseffects
#stereodevices #custompedals #greekpedals

4 input stereo mixer with AUX mono-sum output

This is the mini Buffer with variable output Impedance and it's suitable for use with a guitar, bass and any other instrument with similar pickups.
A buffer is a circuit where the output is the same as the input. The "secret" is that this particular buffer circuit has a very high input impedance (10Mohm) and variable output impedance (0~220kohm).

Without getting into many details this eventually means that it improves the high frequency response of your overall pedal chain so that you don't lose your tone as your highs aren't getting sucked up.

Additionally, through its single knob you can adjust its output impedance to match the output impedance of your guitar pickups so that any pedal (e.g. a vintage fuzz, or any low input impedance pedal) that comes after the buffer behaves in the same manner as when you connect the guitar directly to it.

A buffer can also help you run long cords without risking losing tone or making your sound bassy and muffled

- Input impedance: 10Mohm (constant)
- Output Impedance: variable 0~220kohm
- Voltage Required: DC 9-24 Volt (Use 12-24V for more headroom)
- Max Current draw: 4mA @ 9 volts
- Aluminum Enclosure, dimensions: 93 x 38 x 32mm (3.66 x 1.49 x 1.26in)

#buffer #dpFX #dpFXpedals #dpeffects #boutiquepedals #boutiqueeffects #handmadeeffects #handpaintedpedals #handpainted #guitarpedals #basspedals #pedalseffects #pedaldandeffects #custompedals #variablebuffer #variableimpedance #bufferpedal #bassbuffer #guitarbuffer #basseffects #エフェクター

Custom stereo mixer with TS ¼’’ (6.35mm) inputs/outputs. It can be used as a summing box for instrument or line level signals and can take up to 4 stereo input signals. (More specs in first comment)

#dpFXpedals #dpFX #stereosummingbox #stereopedals #stereomixer #stereoeffects #parallelmixer #summingbox #boutiquepedals #pedalbuilder #handpaintedpedals #handmadepedals #stereopedalboard #pedalseffects #stereodevices #custompedals #greekpedals

4-way splitter with all four outputs isolated. This active, buffered, 4-way Splitter is suitable both for bass & guitar or any other instrument with similar pickups. More info/specs in first comment.

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder #pedalsandeffects

4-way splitter/switcher pedal, isolated, with four foot-switches

4 input Stereo Mixer with additional mono AUX-out. Suitable for stereo pedals, compatible with line level signals, can also be used for synths. (detailed specs in the first comment)

#dpFXpedals #dpFX #stereosummingbox #stereopedals #stereomixer
#stereoeffects #parallelmixer #summingbox #boutiquepedals #pedalbuilder
#handpaintedpedals #handmadepedals #stereopedalboard #pedalseffects
#stereodevices #custompedals #greekpedals

2 input mixer with two variable filters (LPF & HPF)
More details/specs in the first comment

#dpFX #dpFXpedals #boutiquepedals #custompedals #guitarpedals #basspedals #pedaleffects #mixer #HPF #LPF #mixer #handmadepedals #handmadeproducts #handpainted

2 input mixer pedal with HPF & LPF filters, THRU outputs and mute footswitch

Custom mixer for Stereo Signals (Input + AUX), equipped with Headphones out.
#dpfx #dpFXpedals #stereodevices #stereomixer #pedalmixer #stereopedals #boutiquepedals #handpaintedpedals #handmadepedals #heisenberg #breakingbad #custompedals #headphonepreamp #headphonesout #dpeffects #headphonespreamp #greekpedals #エフェクター

4-way splitter with all four outputs isolated.
This is an active, buffered, 4-way Splitter suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.

Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom (DO NOT EXCEED 18V) so that you can also use it for line level signals.

All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.

▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-18V DC [Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V || 15mA @ 18V
▹ Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Weight: 435gr

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder

Remote Controlled Tails bypass Looper.
In this custom version the switching is done remotely with the help of any latching switcher (e.g. Boss MS3 or similar) that should be connected to the TS jack marked as “Remote ON/OFF”
Tails Bypass Looper offers you the ability too add tails (aka trails) to any of your time-based effects. Which means that you can bypass your delay and still be able to hear the repeats fading.
The looper is active and has unity gain (no volume loss) with buffered inputs/outputs in order to maintain your tone intact.
Just connect your time-based effect to the Send/Return loop and with your switcher you can bypass it anytime you see fit, keeping the tails in the mix along with your dry signal.

▹ Input impedance: IN = 360kΩ, RTN = 200kΩ
▹ Output impedance: SND/OUT: 100Ω
▹ Voltage Required: DC 9 Volt

#dpFX #dpFXpedals #boutiquepedals #tailslooper #trailslooper #handpaintedpedals #handmadepedals #custompedals #pedalbuilder #greekpedals #dpeffects #tailsbypasslooper

4-way Buffered-Splitter, suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.
Every output is buffered and equal to the input (zero volume drop) and each one has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.
The splitter can be powered with a variery of voltages ranging from 9V up to 24V max. Larger voltages offer you more headroom

▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-24V DC (Polarity: Center negative)
▹ Current consumption: 10mA @ 9V
▹ Enclosure dimensions: 120 x 95 x 35 mm

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #handpainted

ChugSaw! All the chainsaw metal chug you need!
This is a guitar distortion that gives you that classic Swedish chainsaw sound that many Death'n'Roll and Death metal bands have been using since the 90s.
While it is based on that classic, widely known circuit we tried to simplify things by desinging a one-knob version with two toggle switches for mids shaping.

- The Right toggle switch (2-pos.) changes the sharpness of the mids Q-factor.
- The Left toggle switch (3-pos.) offers you three different settings for mids by actually changing the width of the mids spectrum.
- Internally the EQ settings for High and Low are fixed at max.

▹ True Bypass
▹ The circuit is built around the classic RC4558 op amp.

#dpFXpedals #dpFX #guitardistortion
#guitarpedals #boutiquepedals #handmadepedals
#handpaintedpedals #metaldistortion #entombed #entombedsound
#greekpedals #custompedals #customeffects
#distortion #swedishchainsaw #chug #willitchug #guitarchug #deathnroll #swedishdeathmetal #lefthandpath

Tri-Parallel Stereo Blender [V2.0]
This is an all analog Stereo Parallel Blender that offers three independent parallel loops with tails capability, stereo/mono selection, dry blend and master volume control.
Every loop has its own Send/Return volume knob, EQ, phase reverse, and a dedicated footswitch.

The device is able to handle signals varying from instrument level up to
higher line level (~24Vpp max).
All jacks are TRS. The device is compatible with mono signals as well. Mono FX-Loops can be combined wth Stereo FX-Loops.

#triparallelmixer #triparallelstereo #dpFXpedals #dpFX #stereodevices #stereopedals #stereoblender #stereoeffects #pedalblender #blenderpedal #paralleleffects #paralleleffectsloop #stereoloop #boutiquepedals #pedalbuilder #triparallel #handpaintedpedals #handmadepedals #greekpedals #custompedals #parallelblender #greekpedals

NEW! 4 input Stereo Mixer designed for stereo pedals & pedalboards also compatible with line level signals and can also be used for synths.
The NEW feature of this mixer compared to our 3ch Stereo Mixer is the addition of a Mono (TS) AUX output which offers both channels L+R of the stereo output mixed down to mono.
It can be used as a summing box that can take up to 4 stereo signals and combine them into a single TRS or TS output.

▹ 4 TRS inputs
▹ 1 TRS output & 1 TS output
▹ Input impedance: ~470kΩ
▹ Output impedance: 470Ω
▹ Voltage required: DC 9-24 V
▹ Current draw: 28mA @ 9V
▹ The mixer is always ON when power is connected
▹ Enlosure dimensions: 152x82x52 mm
▹ Weight: 400gr

#dpFXpedals #dpFX #stereosummingbox #stereopedals #stereomixer
#stereoeffects #parallelmixer #summingbox #boutiquepedals #pedalbuilder #handpaintedpedals #handmadepedals #stereopedalboard #pedalseffects #stereodevices #custompedals #greekpedals