Lmst
Login

#Autocad

JilanicoJilanico
2025-12-21

Go Board final update: In , , etc, movement of pieces matters, but in it's the placement. Stones glow as they are placed, emphasizing this (traditionally sound plays this role). The stone's glow also hints at its influence on surrounding spaces.

JilanicoJilanico
2025-12-13

Go Board project update: it's done! The "bowls" don't have traditional lids, so there's no place to put captured stones, but I can live without it. What do y'all think?

Top down view of a 3D printed go board and 2 containers for the stones. The stones on the board are glowing green and blue.Side view of the containers for the go stonesSide view of the go board
JilanicoJilanico
2025-12-11

Go Board project update: Finished 3D printing bowls. Twisting the bowl causes the "petals" to rotate open. Found it on thingiverse.com/thing:7204987

Now to fix the dead zone issue and I'll be done!

3D printed container that has "petals" as a lid that rotate open when the container is twisted.
JilanicoJilanico
2025-12-10

Go Board project update: Feel the power, Kronk. Used translucent filament for a test print of the bowl to check capacity/failures before I print the actual thing.

A translucent bowl full of green glowing Go stones sitting atop a Go board
LinuxNews.delinuxnews@social.anoxinon.de
2025-12-09

Jetzt hab ich alles gesehen: Ein Geschäftsführer der Rechnungen in #autocad schreibt.

Naja wenigstens ist es nicht #excel oder #word 🤷🏻‍♂️

#eRechnung

JilanicoJilanico
2025-12-09

Go Board project update: finished making 70 green & 70 blue stones. Of course I'm going to use them for :) Next thing is to make bowls for the stones.

Blue and green glowing Go stones forming my logo on a Go board.
JilanicoJilanico
2025-12-08

Go Board project update: I was testing the Go stones I've made so far and realized I can use them to visualize the dead zone in the magnetic field. The dead zone is thicker the higher I go so the solution to minimize it is to adhere the coil to the bottom of the board instead of the bottom of the case

JilanicoJilanico
2025-12-05

Go Board project update: dead zone in magnetic field just above the induction coil extending up & out. This cone intersects w/ corners of the board causing a stone to glow less/not at all depending on how it's placed. Could tweak the board so cone doesn't intersect but this sidequest is becoming a campaign

2 blue glowing go stones. The one in the corner is less bright 2 green glowing go stones. The one in the corner is less bright
JilanicoJilanico
2025-12-04

Cyberpunk Go Board project update: gotta insert an LED and glue on the colored bottom surface for 140 stones 😅 This was supposed to be a side quest 🥲

Four 3D printed Go stones upside down showing colored bottom surfaces, 2 green and 2 blue.
JilanicoJilanico
2025-12-04

Go Board project update: underside of stones will be color coded so the color is apparent even when the stone isn't illuminated. Also helps w/ post-game analysis, like the flat side of style stones

3D printed Go stones upside down showing a blue bottom surface.
JilanicoJilanico
2025-12-01

Cyberpunk Go Board project update: 3D printed housing for the induction coil. Modified a design from Thingiverse thingiverse.com/thing:4676299

Housing containing an induction coil and associated circuitry
JilanicoJilanico
2025-11-30

Forbidden candy 🤤 3d printed Go stones with embedded LEDs. I'm going with blue and green since I feel they best fit the project's cyberpunk theme

4 glowing Go stones, 2 green and 2 blue5 glowing Go stones: white, blue, green, red, orange
JilanicoJilanico
2025-11-29

Cyberpunk Go Board project update: I had to design a 9x9 board due to 2 constraints - stone size and printer bed size. Printing in pieces would drag this sidequest out 😮‍💨 was hoping for 13x13 tho

3d printed goban with 2 glowing stones, one blue and the other green 3d model of a 9x9 goban
JilanicoJilanico
2025-11-27

Cyberpunk Go Board project update: printed stone w/ translucent filament (bottom). Compared to white filament (top), translucent slightly more glowy. Should I try less infill?

2 go stones glowing blue due to embedded LEDs.
JilanicoJilanico
2025-11-27

Cyberpunk Go Board project update: 3D printed the Go stone and inserted LED. It works! Now to try printing with translucent filament. Follow me for updates :)

3d printed go stone glowing blue inside an induction coil3d printed go stone glowing blue
JilanicoJilanico
2025-11-26

Cyberpunk Go Board project update: 3D modeling a Go stone to house the LED using . Follow me for updates :)

Screenshot of tinkercad software depicting a 3D model of a Go stone with a cavity to house an LED
Andrew Armstrongtechygeekshome@techhub.social
2025-11-19

How to deploy AutoCAD using SCCM | techygeekshome.info/how-to-dep #Autodesk #Guide #SCCM 
techygeekshome.info/how-to-dep

Anthony Powellajguides
2025-11-19

How to deploy AutoCAD using SCCM | techygeekshome.info/how-to-dep  
techygeekshome.info/how-to-dep

Éric 🐛ebugnet@framapiaf.org
2025-11-14

Gestion des blocs dynamiques avec Autocad - TUTORIEL AUTOCAD : Les blocs dynamiques - IMAAGO© | imaago.fr/tutoriel-autocad-les | #autocad

🚀 Несерьёзный Выдумщик 👨‍🔬🛠grumb@shitpost.poridge.club
2025-11-13

Русские и живущие в РФ почему-то поголовно считают, что основные мировые #САПР — это какой-нибудь #AutoCAD от того же #Autodesk
При этом, на поверку понятия не имеют, что САПР-ы вообщем-то сильно разные бывают: #CAD, #CAM, #CAE и даже всякие BIM или же #EDA, а так же #ECAD.
Как минимум два вида классификации

И тот факт, что на пост-советском пространстве популярность обрёл AutoCAD не отменяет многолетнее противостояние адептов #CATIA vs. #NX от Siemens, оно же #Unigraphics, а рядом с этим ещё и #Creo трётся постоянно (в прошлом известное как Pro/ENGINEER).
Этим инженерным школам и культурам, сложившимся вокруг данных САПР уже больше лет, чем большинству активных пользователей интернета.

И серьёзное место в мире САПР занимают решения от чисто российских компаний, если не считать ядра-движки от выходцев с пост-СССР. Например, компания стоящая за «Компас-3D» примечательна отнюдь не этим поделием, а заслугами своей «дочки» — «C3D Labs». Занимающейся разработкой и поставкой математического ядра по white boxing всем желающим. А таких ядер всего штук пять в мире и на них построена почти вся масса 3D САПР.
Да кому мол нужен то этот ваш «Компас-3D» в мире от упоротой «Аскон». Да в общем-то мало кому, а вот математического ядро от их «дочки» вполне неплохо востребовано по миру.

#softdev #software @Russia@3zi.ru @rur@social.sley.nl

Client Info

Server: https://mastodon.social
Version: 2025.07
Repository: https://github.com/cyevgeniy/lmst