@micr0 the #MxMaster has so horrible #lag that @fuchsiii literally can't use it.

• And since #Logiteh are a bunch of greedy folks, one does nit get the smooth scroll wheel on #Lightspeed mice either...

Mycha #MXMaster3SM mi się zepsuła – zapomniała konfiguracji, a jak włączam Logi Option+ to przez chwilę się ładuje, po czym się wyłącza :/
#Logitech #MXMaster #komputery

So I noticed a new folder called “ai_overlay_tmp” in my home folder. Turns out it was created by #Logitech’s #LogiOptions+ app. Why TF does my mouse need #AI!?

Uninstalled Logitech's #bloatware and I’m now using an #OpenSource #MacOS app called #MacMouseFix to assign custom actions to my #MXMaster's forward and back buttons. Unfortunately it doesn't seem to support custom actions on the thumb button.

https://github.com/noah-nuebling/mac-mouse-fix

Ich bin auch ein Held. Hab gestern den #MacMini inkl. Tastatur und Maus mit ins #Homeoffice genommen. Doch was hängt noch am USB-Hub im Büro, richtig der Dongle 🙄Zum Glück lässt sich die #Logitech #MXKeys und die #MXMaster auch per Bluetooth koppeln. #computerkram

@Joseph @Paradox we,, I get the same with the #UltraNav-Style #Trackpoint:

I just press the middle mouse button on it and slightly move the pointer downwards...

This allows for even more comfortable and faster scrolling than an #MXmaster with the "infinite scrolling wheel" at fastest schrolling speed...

Logitech & iFixit starten Programm für Selbstreparatur von Mäusen & Co #iFixit #Logitech #Reparatur #Ersatzteile #Maus #Tastatur #MXMaster https://winfuture.de/news,136290.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

@Claydisarray I’ve never liked that mouse, it’s been garbage from day one 2 decades ago.
#logitech #mxMaster series all the way!

Does anyone know if it might be possible to patch the firmware of a #Logitech MX Master 3S / Business mouse to assign the #EasySwitch button to another mouse button?
It's so annoying to flip the mouse over everytime I want to switch between paired devices, it's like they hired the Apple Magic Mouse engineer...
#mxmaster #mouse

Zapłaciłem za całą myszkę #MXMaster to zużyję ją do końca 😅 No dobra, czas na nowszy model. Taka tam drobna różnica

A volte la felicità la puoi trovare pure in un mouse ed una tastiera

#logitech #mxkeys #mxmaster

Let's have a look if it's time to change mice after more than 13 years. #magicmouse #blender #mxmaster

the iFixit guide is essentially correct, but here are some other notes if the scroll wheel starts feeling gummy. for me, gently pulling the wheel up got rid of the gummyness until i pressed the wheel, but turns out this has nothing to do with the click spring below the wheel. i simply had to clean the lint and dust from the inside of the wheel:

1. turn off the mouse
2. peel off the 3 feet of the mouse (the front one can stay) and remove the screws underneath with a 00 philips bit. the ifixit guide say the feet aren’t reusable unless heated beforehand, but if you dig deep enough (i used the guitar pick-like ifixit opener thing) you can pull off all the adhesive together with the feet in one piece, which can be just stuck back later. also remove the exposed screw on the front with a T5 torx bit
3. pull off the shell from the mouse. i used the guitar pick-like thing liberally. there are two challenges: there is a very stiff clip below the right button, so the base has to be slid forward to disengage it, but the scroll wheel and the lip of the base next to the horizontal scroll wheel will prevent the base from sliding forward. my tactic was to pull the base downwards while pushing it as forward as possible, and poking with the guitar pick-thing below the right button
4. disconnect the ribbon cable from the base. make sure not to break both pegs of the clip holding the cable. the shell is free now
5. clean around the wheel and especially the teeth of the internal gear on the while. i wrapped a microfibre cloth around the (closed) jaws of plastic tweezers to get between the teeth properly. compressed air would also help here, i believe, and maybe even some silicone oil for the axle
6. reconnect the ribbon cable. this may require some maneuvering, because the shell obstructs the space for the fingers
7. turn the mouse on and test whether it still works (it’s a pain to have to disassemble right after you have put it back together). make sure not to touch any PCB, then turn the mouse off again
8. snap the shell back to the base. the challenges are the same as for the disassembly. i could get it to snap back fully together except for the stiff clip below the right button. a combination of pushing the clip itself back (using a piece of plastic) from the gap left at the front and pushing from the top helped
9. put back the screws and stick the feet back

i also had some luck previously with rejuvenating the rubber coating eaten by skin oils with some isopropyl alcohol and cotton balls. i hope to use this mouse for a long time, despite it accumulating wear and tear quite readily

#logitech #mxmaster #repair #cleaning

uuuurrrgh. I bought a #logitech #MXmaster 3S mouse and somehow the much much much quieter clicks have made me passionately hate the otherwise perfectly fine MX Master 3 I've got at home 😆

#tech #gadgets

I just got brand new Logitech MX Combo for business:

✨ MX Keys & MX Master 3 ✨

Picture 2 for comparison with my previous (quite basic) setup 😂

BTW: So far seems to work nicely on Ubuntu. However, I haven't tried yet some features ñ, maybe they'll work with some drivers.

#logitech #mxkeys #MXMaster #ubuntu

[レビュー] 究極のマウス ロジクール MX MASTER 3 https://windows-podcast.com/sundayprogrammer/archives/2118 #Logicool #mxmaster #WoodStreamのデジタル生活