Modular Box Design Eases Silicone Mold-Making
Resin casting is a fantastic way to produce highly detailed parts in a wide variety of colors and properties, and while the process isn't complicated, it does require a certain amount of care and setup. Most molds are made by putting a part into a custom-made disposable box and pouring silicone over it, but [Foaly] was finding the process of making and re-making those boxes a bit less optimized than it could be. That led to this design for a re-usable, modular, adjustable mold box that makes the workflow for small parts considerably more efficient.
The walls of the adjustable box are four identical 3D-printed parts with captive magnets, and the base of the box is a piece of laser-cut steel sheet upon which the magnetic walls attach. The positioning and polarity of the magnets are such that the box can be assembled in a variety of sizes, and multiple walls can be stacked to make a taller mold. To aid cleanup and help prevent contamination that might interfere with curing, the inner surfaces of each piece are coated in Kapton tape.
The result is a modular box that can be used and re-used, and doesn't slow down the process of creating and iterating on mold designs. The system as designed is intended for small parts, but [Foaly] feels there is (probably) no reason it can't be scaled up to some degree. Interested? The design files are available from the project's GitHub repository, and if you need to brush up a bit on how resin casting works, you can read all about it here.
#toolhacks #3dprinted #adjustable #casting #magnets #moldmaking #resin #silicone
