#moldmaking

2025-10-25

Well it's been a while but me and above all my manager have decided to start a new project.
Meetings have been had and after a clear division of tasks manager had a well deserved nap.
BUT don't worry he'll be there for unannounced quality checks. 🙀

For QC passed works :thinkerguns:

thuhstudio.etsy.com

2025-08-18

Finally started to try my hands at mold making for tin casting. I decided to go for some #larp coins.

As I just started out last week, I'm quite happy with the result. This is my second mold design.

Generally, from 3D designing the coins in #blender, to creating the mold with years old silicon, to actual casting in our flat with a hand burner, this went smoother than I feared. Still had quite a few missteps and learning experiences.

#SomethingNice #TinCasting #MoldMaking #WarhammerChaos

A self-made mold for tin casting. It can cast 6 coins at a time. 2 of the coins have small holes from incomplete casting.
2025-07-19

Hi everybody 👋🏻 how's your weekend going? For the last week I've been working on a new project. And I can tell you..
It's gonna be big
It's gonna be heavy
It's gonna be bold..

For finished works checkout ThuhShop at :thinkerguns:
thuhstudio.etsy.com

2025-05-21

The results of said find:
#casting #moldmaking #dollheads

Colorful resin casts of an old doll headColorful resin casts of an old doll head with original in focus front and center
DJ Sundog from the *new* toot-labdjsundog@fedi.reclaim.technology
2025-02-09

Friendship ended with Siraya Tech Sculpt Creamy.

Anycubic ABS-Like Resin V2 Gray, in all its water-washable glory, is new best friend.

#3dPrinting #MoldMaking

2025-01-02

Estas fiestas hemos tenido update de las #Pokeball y el proyecto molde.

Resumen: estamos MUY cerca pero hay fallos gordos. Se ve increíble, con mucho brillo y eso que no las he pulido. Pero las burbujas me están amargando. Los bordes están fatal.

Pero bueno, ya casi está, se vienen prontito!

#3D #3Dprinting #moldmaking

Pete Prodoehl 🍕rasterweb
2024-11-18

More mold making. Really getting the hang of this silicone stuff.

A silicone mold made using a 3D printed object.
Pete Prodoehl 🍕rasterweb
2024-11-14

Making a silicone mold for a project today. If this works I need to make one about 25 centimeters square. (Though I’m pretty sure this may need some tweaking.) This one is like 10cm square.

A 3D print filled with silicone to make a mold.
2024-04-11

Silo: a current project
More de-molding pictures… and more… and more… is revealed.. Its looking satisfying until now.

This piece is not available in ThuhShop yet…. but.. for other works → → →
www.thuhstudio.etsy.com

2024-04-11

Silo: a current project
Well, well it’s de-molding time. Always exciting! How did the seems from the different pouring stages come out, are there air pockets or a lot bubbles. And some nice shots like a ruin in a snowstorm.

This piece is not available in yet… for other works → → →
www.thuhstudio.etsy.com

2024-04-06

Silo: a current project
Some fun with cement pictures; the mold is divided in 3 parts. The 3 stage pouring of the cement will prevent air-pockets in difficult to reach areas.

This piece is not available in ThuhShop yet…. but..
for other works → → →

www.thuhstudio.etsy.com

2024-04-03

Silo: a current project at the moment.
Some fun with foam pictures the first and last picture show the study model for ‘Silo’. The two middle pictures show sections of the actual mold in which ‘Silo’ will be poured.

This piece is not available in ThuhShop yet…. but.. for other works → → →
www.thuhstudio.etsy.com

2024-02-14

To avoid air pockets in for the concrete difficult to reach spaces the mold has been build in two parts.
Which allows for a two stage pouring of the concrete.
At some larger surface areas the mold is purposely build up in layers which later create lines and relief in the hardened concrete.

The end result → etsy.com/listing/1659067350/ta


2024-02-14

the mold for Takamatsu I; besides the main ingredient EPS-foam, small round bamboo sticks are used. The idea is that after the concrete has cured the sticks would be drilled out and leave small ‘tunnels’ to run the electrical wiring through. Next time something softer, the drilling out was quit a pain.

The end result → etsy.com/listing/1659067350/ta

2024-01-23

Falls sich wer fragt wo neue Würfel bleiben… ich arbeite dran 🙄.

#dicemaking #moldmaking #dicemaker #handmadedice #pnpde

Eine noch nicht fertige Silikonform für Würfel…
2023-11-26

Möge sie mir besser dienen als die letzte!

#dicemaking #dicemaker #handmadedice #moldmaking

Yea I like acrylic better than wood for thermoform. Bucks just pops out like I had draft angles. That’s good. Bad is I need to add magnet holes to larger pieces. My NC states float a bit under the vibration of the vacuum. SC did fine.

#lasercutting #thermoforming #maker #moldmaking #acrylics

2023-09-22

Und so sieht die Form aus wenn sie fertig ist.

#Moldmaking #Dicemaker #Dicemaking

Client Info

Server: https://mastodon.social
Version: 2025.07
Repository: https://github.com/cyevgeniy/lmst