Lmst

I’ve just finished a kitbash of Art the Clown from the Terrifier series of films, for use as a Killer in Don’t Look Back. Hell of a challenge and I’m delighted with the result!

#28mmminiatures #tabletopgaming #miniaturepainting #wargaming #miniatures #bssterrain #blacksitestudios #dontlookbackgame #tabletopwargaming #horror #dontlookback #slasher #terrifier #kitbash #greenstuff #milliput

Applied #Milliput to the seams on the #Ornithopter. Will leave overnight then sand it smooth. #Dune #Atreides #MengModels #72Scale # SciFiModels #ScaleModels #ModelBuilder #MKMModelwerx

So I have assembled the terrain from the Fire and Jade spearhead box and, despite my best efforts, I have tiny cracks where the parts meet.
All I have at home is milliput and badly made sprue goo. If anyone has advice on how to best fix this, I'm all ears.
I'd like to keep the corners and details sharp but if that's not possible, so be it.

#Warhammer #WarhammerCommunity #warhamFam #aos #spearhead #terrain #milliput #miniaturepainting

A plastic wall with a tiny crack in the corner, where both parts meet, seen from the outside

A plastic wall with a tiny crack in the corner, where both parts meet, seen from the inside

An undefined train feature in grey plastic, with wine cracks in the middle of some details

First round of #Milliput and sanding done on the secondary hull and pylons. I’ve also drilled out a 7mm hole for the stand rod and scraped out channels in the pylons for a 3mm support rod which will also hold the electrical wires to the nacelles. Next up is more milliput and sanding. #StarTrek #StarTrekModels #ConstitutionClass #Federation #Starship #537Scale #ScaleModels #ModelBuilder #MKMModelwerx

Windows masked off on the Delta Flyer, I applied epoxy glue to the cockpit and it’s being held down in place by masking tape instead of clamps. Next up is more gap filling with #Milliput. #StarTrek #StarTrekModels #DeltaFlyer #USSVoyager #Federation #Shuttle #72Scale #ScaleModels #ModelBuilder #MKMModelwerx

Delta Flyer model with 2 strips of yellow masking tape holding the cockpit in place while the glue sets

Another model I started over a year ago was the 1/72 Delta Flyer from Cozmic Scale Models. Today I got back to it with sanding the #Milliput on the gaps/seams and smoothing down the print lines. Still got a lot to do before it’s ready for paint. #StarTrek #StarTrekModels #DeltaFlyer #Voyager #Federation #Shuttle #72Scale #ScaleModels #ModelBuilder #MKMModelwerx

Unpainted model with cockpit canopy removed showing the interior.

First light blocking coat of black has been applied. Before I do more, I’ll need to go over some more areas with #Milliput to get the bits I missed (I really need to start wearing my glasses). #StarTrek #StarTrekModels #USSEnterprise #Enterprise #NeoConstitutionClass #Federation #Starship #1400Scale #ScaleModels #ModelBuilder #MKMModelwerx

The clear bridge dome broke as I removed it from the spruce, so I sculpted a new one out of #Milliput. Downside is that it won’t light up. It’s not perfect, but it’ll do. #StarTrek #StarTrekModels #USSEnterprise #Enterprise #NeoConstitutionClass #Federation #Starship #1400Scale #ScaleModels #ModelBuilder #MKMModelwerx

Closeup of the yellow milliput bridge dome I created.

Clamps and masking tape removed from the nacelles. Next up is gap/seam filling with #milliput. #StarTrek #StarTrekModels #USSEnterprise #Enterprise #NeoConstitutionClass #Federation #Starship #1400Scale #ScaleModels #ModelBuilder #MKMModelwerx

Closeup of the Enterprise G model’s port nacelle

Been a bit, but I finally got the courage up to do some more sculpting for my #fedipaint entry. Two pieces of advice I'd seen around the web made all the difference:
1) sculpt in small sections
2) mix #milliput & #greenstuff
I actually had the other shoulder done as well, but was not at all happy with the outcome. Thanks to tip #1 I was able to easily remove the later bits without damaging what I liked.
#WarhammerCommunity #warhammer40k #miniatures

Converted beastman miniature with sculpted detail, rear view

Converted beastman miniature with sculpted detail, left side view

Broke out the milliput this evening and was able to get a start on some of the gaps. Finding myself being overly cautious as I start to learn the sculpting arts, but hoping it'll pay off. Baby steps...
#WarhammerCommunity #warhammer40k #WIPWednesday #milliput

Fellgor Iconarch showing off some rudimentary milliput filling

Ungor Mindwitch showing some milliput filling

As expected, I had to go back over a few areas around the warp nacelle chiller grilles with #Milliput. Will sand it smooth tonight and then she’ll hopefully be ready for paint. #StarTrek #GalaxyClass #Federation #Starship #ScaleModels #ModelBuilder #MKMModelwerx

Port warp nacelle showing some small areas with more milliput applied

Starboard warp nacelle showing some small areas with more milliput applied

Nacelle assembly completed. Will leave the masking tape on for an hour to make sure the glues have done their thing, then I’ll fill the gaps/seams with #Milliput. #StarTrek #GalaxyClass #Federation #Starship #ScaleModels #ModelBuilder #MKMModelwerx

View of both warp nacelles with 3 strips of yellow masking tape at the front, middle and back of each to hold all the parts in place.

Forgot to post these last night. I’ve got the deflector glued into place and #Milliput applied around the metal tube and power connector to strengthen its hold to support the weight of the model. #StarTrek #GalaxyClass #Scalemodels #MKMModelwerx

Milliput applied round the metal tube and power connector to strengthen its hokd

Front view of the deflector glued into place

About one year ago I touched up with wonderful sculptor and mini converter Luke Mockeridge and we agreed on an art swap, so here is in all its mechanical glory a servitor sculpted by him and painted by me.

#warhammercommunity #warhammer40k #wh40k #paintcultist #coolminis #kitbash #scratchbuilt #plasticard #inq28 #inquisimunda #inquisitor #servitor #reliquary #grimdark40k #blanchitsu #grimdark #warhammer #osl #objectsourcelighting #milliput #greenstuff #dueling_brushmen_paint

Working on conversions and sculpts by Luke Mockeridge is a pleasure I'd recommend to everyone. All his pieces are incredibly detailed and full of character, I love them.

#warhammercommunity #warhammer40k #wh40k #paintcultist #coolminis #kitbash #scratchbuilt #plasticard #28community #28mag #28creatives #inq28 #inquisimunda #inquisitor #servitor #reliquary #grimdark40k #blanchitsu #grimdark #warhammer #osl #objectsourcelighting #objectsourcelight #milliput #greenstuff #dueling_brushmen_wip

Well, my terminator captain is coming together slowly. Super pleased with how the small bit looks tucked in on his forward leg, but the rest of it needs some refinement.was reading up on the elasticity of green stuff and thinking it would be easier to work with for this purpose. Would love to hear tips on this if anyone has them! #warhammer #warhammer40k #milliput #40k