I'm too dumb with networking to figure this out - but my #WireGuard #wg-easy setup hosted on #Portainer with a rootless #Podman socket, while it's mostly working, I can't SSH into devices on the network when I'm remote (with #VPN). It's fine if I'm local (with/without VPN). Tried fiddling with sysctl, iptables, etc. but no results so far.

Just took a look at my PFSense box, and saw that my secondary OpenVPN connection was down.
Looked at the provider's site, and it turns out that they deprecated OpenVPN a while back!

So, tonight has consisted of me learning about and setting up: Wireguard

I'm back in action now, and looking forward to seeing whether this new VPN protocol will have any speed benefits for me!

#homelab #sysadmin #openvpn #wireguard #pfsense

@gummibando @bitbonk Correct. 7.3.x is effectivly DSM 7.2.2 just under a different numbering due to HDD HCL 5.0 policy. So from the architecture side of things it is still 7.2. Similar as with the #wireguard package that I have compiled under 7.2.x and it still works on the latest version of 7.3.2. I do not have any confirmation for the Plex transcode feature, but also there are no users that have complained about it since it came out, so my answer is 99%, it works.

Grr. The GUI ProtonVPN app on my Linux Mint machine stopped working (opened in a blank window and you can't do anything).

Managed to install WireGuard and get a config file from Proton. And that's working fine. All terminal window of course - but I'm slipping into that sort of Linux user* that quite likes using it now.

(That's most Linux users, right? 😂 )

#Linux #LinuxMint #ProtonVPN #WireGuard #VPN

Tailscale

Tailscale is a centrally-managed overlay network VPN service that provides seamless connectivity across your devices no matter where they reside, with a few interesting features:(...)

#network #overlay #vpn #wireguard

https://taoofmac.com/space/apps/tailscale?utm_content=atom&utm_source=mastodon&utm_medium=social

My blog and most of my public sites are now hosted in a VM that lives on (ridiculously overpowered) hardware in my basement.

The wrinkle this time is that that VM has dedicated directly internet routable IPs, both IPv4 and #IPv6. I'll write up how that works at some point because I find it really interesting.

Preview: I have a router VM (#alpine linux running bird) living in a datacenter in Chicago that backhauls over #wireguard to my #Mikrotik RB5009 at home which then forwards that traffic directly onto a public, isolated VLAN. Packets are entirely L3 routed, no proxies or port forwards involved until traffic hits Caddy on the host.

#Homelab #selfhosted

Mein neuestes Projekt: Wireguard VPN an der Fritz!Box installiert, abgesichert und VPN am iPhone aktiviert. Und schon hatte ich von unterwegs einen sicheren Zugriff auf meine Raspberry im Heimnetz. War überrraschenderweise problemlos einfach.
#vpn #fritzbox #wireguard #raspberry

Your VPN isn't for watching geo-blocked streams. It's the way of your privacy. #vpn #wireguard #cybersecurity #privacy #encryption

http://tomsitcafe.com/2026/01/30/wireguard-secret-path-in-the-shades/

VPN isn't for watching streams. It's the secret path for your private connections.

https://silentarchitect.org/2026/01/wireguard-hidden-path-in-the-shades.html

#vpn #wireguard #cybersecurity #ghostware

clawd.bot -> molt.bot -> openclaw.ai

https://harishpillay.com/2026/01/30/clawd-bot-molt-bot-openclaw-ai/

#SelfHosting folks: Anyone have success in setting up #WireGuard for accessing a local network behind a CGNAT? Inexpensive #VPS recommendations welcome.

#SelfHosting folks: Anyone have success in setting up #WireGuard for accessing a local network behind a CGNAT? Inexpensive #VPS recommendations welcome.

Regenerating a large backup storage pool over a #WireGuard tunnel to a remote destination thousands km away.

This is way beyond the theoretical bottleneck speed of 50 Mb/s that the slowest ISP is throttling to.

#selfhosted

【VPN設備なし】WireGuardでオフィスのAIサーバー(DGX Spark ollama)を外部利用
https://qiita.com/ntaka329/items/9d292b578278473eb052?utm_campaign=popular_items&utm_medium=feed&utm_source=popular_items

#qiita #AWS #wireguard #生成AI #ollama #DGXSpark

Okay ...
I need to configure a pi-hole next week.

I have a server with a VPN to my home network. This server gets all traffic from a certain domain to their nginx.

But I want to be able to call certain Subdomains only via the VPN / my home network. Therefore I have to configure my own DNS...

Anything I have to keep in mind while doing this?

#pihole #dns #vpn #wireguard #server

Put your application inside a VPN jail

The premise Note; political rant with European bias follows. If you don't want to be exposed to my political views but still want to read the technical content of this article, simply skip the "Premise" and scroll down to "My data under my control". Looking at the rapidly deteriorating situation in the United States of America with disgust and shock,

#Slackware #rant #wireguard #protonVPN

https://blog.slackware.nl/put-your-application-inside-a-vpn-jail/

J’essaye de me connecter au serveur #vpn de la freebox depuis mon #linuxMint #lmde mais je n’y arrive pas.

Tout marche hein, ça se connecte ben au vpn, depuis l’appli freebox je vois que mon pc est connecté.

Mais le pc n’est pas sur le réseau local. Je ne comprends pas, et les autres machine n’ont pas accès à mon pc via la nouvelle adresse ip locale non plus (si je fais un python -m http.server par exemple).

J’ai d’abord essayé #wireguard, ça faisait ce qui est décris, mais comme il n’est pas géré nativement par mint et l’interface graphique, je me suis dit que y avait un problème de config.

J’ai donc lancé le openvpn de la freebox, mais ça fait exactement pareil.

Une idée ? Quelque chose m’échappe ?

Je suis à ça de faire un ticket (mais comme je fais probalement mal quelque chose ...). Et je ne trouve pas sur le net/je n’ai pas les bons termes de recherche.

Question subsidiaire : sur téléphone, il y a moyen de demander des identifiant pour se connecter au vpn via wireguard, juste histoire de sécuriser un peu plus (car ça donne accès au réseau local quand même).

#hamchallenge Week 5: Use HAMNET.

OK, I don't know what I am doing, but it only took 5 minutes to get started on #hamnet with #wireguard thanks to https://vpn.hamnet.network/w/de/

@hamchallenge #HC05S

Upgraded the router to #openwrt 25 rc3, and added a #wireguard server to it. Working well with my quick #googlepixel and #gentoo clients. True test will be next month, to see if #youtubetv thinks it's still in #sandiego while I'm overseas. 😁

Gut, dass ich den #PiHole habe, da ich auf dem #IPhone gern #Firefox benutzen möchte aber dort kein #AdGuard installieren darf, weil #Apple mir das verbietet. Und so nutze ich eben mein #VPN über #Wireguard und schicke den Verkehr schön artig nach Hause.
BTW hab ich das eigentlich richtig eingestellt, dass alles über mein Heimnetz läuft? `192.168.178.0/24, 0.0.0.0/0, ::/0`