@arthack wow, loving it! currently enjoying it from a hammock with my headphones. will need to put it on the speakers in the comfy zone, a small room with #WLED stuff, fluffy plushies and couches, in the #Nobreakspace in northern Germany
@arthack wow, loving it! currently enjoying it from a hammock with my headphones. will need to put it on the speakers in the comfy zone, a small room with #WLED stuff, fluffy plushies and couches, in the #Nobreakspace in northern Germany
Sneak peak of my largest installation to date, and that's not even half of it!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Woohoo, 3D-native LED animations! 🙆
Made with unreleased version of https://blinksy.dev, a Rust LED library for embedded micros. 🟥 🟩 🟦
(Music by @noiseissues )
#rustlang #fastled #wled #embedded #creativecoding #opensource #maker
All switches are connected to an #ESP32, which is connected to my #HomeAssistant over #ESPHome. I am just using a binary sensor. Like this I can do this very easily and it is nicer to integrate with lamps etc. The LED-Strip on my mic arm is powered by another ESP32 running #WLED by the way. The ESP gets its power even from the other ESP across the desk.
Epic fail: j'arrive pas à faire un truc qui pourtant me parait tout simple, souder des pauvres câbles à trois points d'un ruban de LEDs. Je suis super mauvais ou je m'y prend avec le mauvais matos ou y a un truc que j'ai raté ?
Bon je retourne bidouiller du software, au moins je me sens moins nul que avec le hardware.
Preview of what will be possible with https://blinksy.dev
#rustlang #fastled #wled #embedded #creativecoding #opensource #maker
I really wanted to make a WLED version of the overpriced Goovee light bars but I wasn't wild about how difficult it was to construct and the overall diffusion of my design, not to mention the amount of work necessary to make sure it's perfectly straight. This next version will slot together much nicer, be easier to construct and wire, and should have some really nice diffusion effects on both sides!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
My BFF wanted to have some light-up eyes for a costume that she's making, specifically ones that would react when she spoke. So I made her this little assembly, which holds some round LED boards a nice distance away from some LED black acrylic. I'm driving them with WLED running on an Adafruit Mini Sparkle Motion board so it can be powered off a battery pack. The built-in mic means she can have her voice-reactive eyes too!
https://www.printables.com/model/1320889-light-up-eyes-assembly
Auftrag von meiner Partnerin eine smarte Beleuchtung für das Schlafzimmer zu bauen: Mit #WLED Controller in der Mitte des Betts und 2 LEDs nach beiden Seiten.
Die beiden vorderen M3 Schrauben dienen als Touch-Schalter (ein/aus und Nachtlicht Modus).
Mittlerweile komme ich auch besser mit Fusion 360 zurecht um damit Gehäuse zu entwerfen 😇
Playing with #WLED programming at the #makerspace today.
So it begins. At Lime St station in #Liverpool. Next stop Glasgow, then cycling the canal to Edinburgh #OHS2025
Think I'm visible enough? 🤣
🌟 Automate your home with Home Assistant + ANAVI Miracle Emitter!
💡 Control addressable LEDs via MQTT or WLED - fully open source.
📱 Stunning effects, full control from any device, seamless integration.
🚀 Final hours of our crowdfunding campaign at @crowdsupply back now for free US shipping & current prices!
https://www.crowdsupply.com/anavi-technology/anavi-miracle-emitter/updates/home-automation-with-the-anavi-miracle-emitter
#homeassistant #neopixel #esp32c3 #esp32 #wled #opensource #crowdfunding
It's not 3D-printed, but @amcewen finally got his bike fitted out with a My Bike's Got LED kit.
Anyone would think we've got an event to go to later in the week.
#OHS2025 #ibal234 #weeknotes #BikeTooter #WLED #ESP32 #MyRibble
Wrote up all about my adventures with Blinksy: an embedded Rust LED library 🌈
https://blog.mikey.nz/first-look-at-blinksy/
✨ Define 1D, 2D, and soon 3D spatial layouts
✨ Create a visual pattern: given the pixel's position in space, what's the color?
✨ Built-in support for WS2812B & APA102 LEDs; easy to add the others
✨ Desktop simulator for creative coding
✨ Quickstart project to jump in
Please share if you like! 💜
#rustlang #fastled #wled #embedded #creativecoding #opensource #maker
Wow! That small idea worked out way more flashy than expected :awesome: pimped up our artist's workshop a little last night... #theGoodHood #art #led #wled #ledmatrix
Today I designed and fabricated a new parametric spool to wind up my addressable fairy/pebble/seed LED light strands. This one holds 40 meters of lights which I use for trail lighting at outdoor events. I use it in conjunction with battery-powered WLED controllers for fun animated trail lights.
It's open source and free to download/remix here: https://www.printables.com/model/1300796-led-light-spool-customizable