#PowerPole

2026-01-20

Close up of the connector.

#PowerPole #WeldingCable #SB175 #solar

A plastic DC power connector held in a human's right hand. Two large cables, one red and one black, go into the back of the connector, well on the front metallic contacts can be seen in the opening.
2026-01-20

Prepping the new battery. I have it set up with 1/0 welding cable and a class T fuse holder, going to an Anderson SB175 connector.

#battery #lifepo4 #PowerPole

A large battery on a concrete basement floor. The top is black plastic, and the positive and negative posts connect via red and black welding cable respectively to a plastic connector. The red cable has a plastic fuse holder in line.
DD3AH 📡📶 🏳️‍🌈🌐 :DARC: DD3AH@social.darc.de
2026-01-05

@dd0ul @DK4HAA

WAGO gibt es auch zum Öffnen. Insofern ist das zum Experimentieren auch gut geeignet. Aber hier wird der Kontakt durch "bissige" Federn bewirkt. Das wird also am selben Kabelende nicht beliebig oft funktionieren. und dazu wird Litze dabei auffasern. Für die wiederholte Trennung von normalen Kabeln ist es auch nicht geeignet.

Und dazu muss man bei jeder Verbindung die Polung beachten und hat dann offene Enden.

Also ich würde sagen: Für die wechselnde Verbindung von Stromversorgung nimmt man besser #PowerPole.

Zum Experimentieren mit Drahtantennen ist #WAGO eine gute Idee.

2025-10-28

@DL6PL That's cool! I was not aware of the charging bay.
now I also gotta share 🤭 I too got some rails (only in the front) and a 3D printed #PowerPole mod for the #ft818

#amateurRadio #hamRadio #vhf #uhf #shortwave #draussenfunker #darc

Yaesu FT-818 amateur radio transceiver sitting on a desktop. It shows the extensible front feed for table top operation.The Transceiver held with one hand. The feed are folded inwards for smalles footprint.The back of the transceiver. There is the 3D Printed powerpole mod visible at the rear of the device.
2025-07-13

Run: Config/Test; Loc: Crossings Park; Date: 2025-07-13; Camera: Phoneous4(Ulefone Armor T27); Proj:TheRmalFlir
Notes - I am figuring things out and will be changing a few things next round for photo position mapping.

Ruth [☕️ 👩🏻‍💻📚✍🏻🧵🪡🍵]platypus@glammr.us
2025-07-01

Fun #HamRadio project to end the afternoon! I learned how to do #PowerPole work.

Backstory: my radios both use these power supply attachments that are like 2/3 of a circle. It's a huge pain because you can attach them (pictured later) and they can slide right off with an accidental tug. So tonight, I set out to change both radios' power supply cables to have a "powerpole" or kind of power lego on the end of them.

I took pics for some phases. I'll link instructions below.

🧵

Supplies laid out. The back of a small radio, a guide to using crimpers, a little lego brick and some pieces of metal, a long curling cable with the 2/3 circles on the ends, and lined up wire cutters, wire strippers, and a crimper.
2025-06-19

Run: Photo; Loc: Crossings Park; Date: 2025-06-19; Camera: Red; Proj: InfraRed
Notes - The clouds were flying by. The sun was out and super bright today.

2025-05-14

#hamchallenge #hc43 #powerpole #3dprinting

Bulkhead mount PP prototype, should look nice eventually.. Still rough around the edges, no matter how many chamfers I add.

I designed this inspired by another similar SB50 mount, since every PP mount I found was just perpendicular to the panel and very simplistic.

2024-12-06

These pics were taken on a photo run to the Crossings Park on 2024-12-06.
The tree maze has been removed recently. The sun reflecting on the ice looks really cool.

Diane Bruce VA3DBva3db@mastodon.radio
2024-10-13

I'm basically done my rotator connector box. Still have to finish mounting it somewhere. Meanwhile, I have enough powerpoles to do maybe 100 radios. *whistles innocently*

#HamRadio #AmateurRadio #Powerpole

2024-07-17

In my opinion Anderson #PowerPole connectors are a nearly ideal system for portable ham radio #power supplies. They are hermaphroditic and can handle high currents. I mainly use the 15 A version since I normally operate QRP, but 30 A and 45 A are also available in the same casing. Crimping is easy - no need to solder. But pay attention what colour casing you put on which side! Ask me how I know. #HamRadio #Amateurfunk #qrp

A battery with a mounted PowerPole connector, a sample connector and the parts for such a connector to crimp to the wire on display
2024-06-29

#PowerPole #maintenance #powerout #entropy #blackout
Hey Marin @TheAntiM
So #PGandE is replacing a pole in my back yard today. The pole is 208 ft. behind the house.
They're assembling the crane now. Preparing to put the counterweights on now.

2024-05-28

Für mein #Yaesu FT891 für #Amateurfunk habe ich jetzt seit letzter Woche einen #lifepo4 Akku. Da es sich anbietet, stelle ich daher aktuell einige Adapter für #Powerpole her um neben dem FT891 auch mein FT4XE Handgerät (DC-Hohlbuchse) und per kleinem Spannungswandler auch mein Handy (USB-C) per PP laden zu können. Bisher gab es nur das auf Netzstrom angewiesene Difona-Netzteil mit #Bananenstecker.
Adapterkabel PP zu Banane funktioniert schonmal. :-)
#hamradio

Client Info

Server: https://mastodon.social
Version: 2025.07
Repository: https://github.com/cyevgeniy/lmst